Live Free or Die Antique Tool Auctions

A Division of Martin J. Donnelly Antique Tools

Nashua Fall International Catalogue Antique Tool Auction

Auctions: September 17 and September 18, 2010

Quality Dealer Sale: Friday, September 17, 2010 07:00 pm - 10:00 pm (During Preview)

Tailgate Sale: September 17 & 18, 2010

ê Full Auction Listing Appears Below ê

Holiday Inn, Everett Turnpike, Nashua, New Hampshire

Special Room Rate: $80.00! Call: (603) 888-1551

Auctioneer: Paul Wilmott, New Hampshire License No. 2913
 

A Portion of the Tailgate Sale at Our Last Auction

 A FUN Auction!
  Auction Preview:  
Friday Sale September 16, 2010 12:00 am - 12:00 am
  September 17, 2010 07:00 am - 09:30 am
Saturday Sale September 17, 2010 07:00 pm - 10:00 pm
  September 18, 2010 07:00 am - 09:30 am

 

 Auction Start:  
Friday Sale September 17, 2010 09:01 am
Saturday Sale September 18, 2010 09:31 am

 

 Gala Dealer Sale:  
Friday Evening September 17, 2010 07:00 pm - 10:00 pm

 

 Tailgate Sale:  
Friday September 17, 2010 7:00 a.m.
Saturday September 18, 2010 7:00 a.m.
Auctions Both Days  
Excel Spreadsheet: Right-Click on a Friday or Saturday Link Below, Select "Save Target As" and Save on Your Hard Disk (Requires Microsoft Excel and Outlook)
Friday Excel Bid Sheet (w/o Thumbnails 1 mb) Saturday
Friday Excel Bid Sheet (w/ Thumbnails 12 mb) Saturday
Questions??? Martin J. Donnelly (607) 566-2617
auct_srch.jpg (18135 bytes)
Auction Listing for September 17 and September 18, 2010
Item: Description: Estimate: Photograph:
1. A BRASS FACED ROSEWOOD BODY BENCH LEVEL by Stanley, Great Turnstile, London, England. This classic English level has a great grain pattern to the Brazilian Rosewood. It is in essentially unused condition. 50 - 100
2. An EARLY TWENTIETH CENTURY EDGE TOOL CATALOGUE by Collins & Company, Hartford, Connecticut. Entitled "Ferramentas Arados", this book has great illustrations of all manner of axes, machetes, hoes, etc. Some of the pages include color illustrations. It is in nearly new condition, noting the beginning of a tear in the seam of the cover of about 2 1/2 inches along the spine. We were intrigued by the possible meaning of the title, so we went to Lowes and went to the Seasonal section and learned from the Spanish words below the English words that it means "iron tools for working the land". Mucho magnifico. 60 - 120
3. An early OFFSET HANDLE JACK PLANE finely crafted from applewood and having an offset yellow birch tote and wedge. The toe has been boldly struck with the intitial imprint "N.J" This late Eighteenth Century jack plane shows virtually no evidence of ever having been used. Nice. 30 - 60
4. A RETRACTABLE BLADE SCREWDRIVER by the P.N. Manufacturing Company, patented November 11, 1884. It is marked on the India rubber handle with the designation "Novelty". These tools were originally produced with knife blades instead of screwdrivers and the knife is shown in the patent specifications. This example is in top collector quality condition. 60 - 120
5. An ADJUSTABLE SHOULDER RABBET PLANE, No. 073, by Record. This 1 1/4" width plane, which is no longer produced, is in nearly new condition in its original box. A great working tool in top collector quality condition. 100 - 200
6. An interesting and unusual CIVIL WAR PERIOD MOLDING PLANE by B. Morrill, Bangor, Maine. The side of the plane is branded with the designation "2nd Battallion U.S. Artillery" side. Included with the tool is a paper printout of a photograph of the 2nd battalion US artillery from Maine that served in the Civil War. Morrill was himself Captain of the Maine militia until 1860 and the presence of this plane with a Maine unit serving in the war is of high likelihood. An historically important woodworking plane that has likely traveled more than most of us. 60 - 120
7. A SOLID CHERRY SPIRIT LEVEL, No. 0, by STANLEY. The sides of this tool are marked with dual gold stamped Stanley logos. It is in brand new, unused condition. 25 - 50
8. A DIMINUTIVE SMOOTHING PLANE by William Ward, 8th Ave., New York. This plane has a beech body and wedge and retains some 95% of its original finish. It is in nearly new condition, noting some minor stains to the body. 50 - 100
9. A ONE HUNDRED AND FIFTIETH ANNIVERSARY COMMEMORATIVE BEVEL by Stanley Tools. These bevels were not part of the offering of commemorative tools produced by Stanley for sale to the general public, but were given to all employees only. This example is in new condition in its original box and is marked on the back side of the body with the designation "Special Edition". 35 - 75
10. A SHIP CAULKER'S "REEFING" IRON by D.R. Barton & Company, Rochester, New York. This uncommon Barton iron is marked with the "1832" ovoid logo and is in nearly new condition. From the John Meneely Collection. 30 - 60
11. An "IMPROVED RULE" COMBINATION RULE that incorporates a penknife and a pencil into a six-inch square body rule. The outside is graduated on one side with English and the other with Metric scales. It has only very slight yellowing to the ivory. From the John Meneely Collection. 125 - 250
12. THREE EXTRA CLEAN HAND SAWS including two Spear & Jackson open handle backing saws and an eight-point panel type crosscut that is engraved with the designation "Challenge". 50 - 100
13. FIVE SPECIAL PURPOSE MOLDING PLANES including a S.E. Farrand rabbet; a J. Kellogg double bead and a glass check plane Drburgh, Dundee, Scotland. 60 - 120
14. An early OAK COACH MAKERS ROUTER PLANE that retains its original sliding fence. This finely crafted brass top plane is in top collector quality condition. From a Prominent California Collection. 80 - 160
15. An example of WOODBRIDGE'S PATENT LATHE CUTTING TOOL, No. 00, by the Hartford Tool Company, Hartford, Connecticut, patented August 15, 1882. This obscure Nineteenth Century machinists tool is in new condition in its original box and clearly marked with the maker name and patent date. 35 - 75
16. A MINIATURE OVERHAND RIP SAW having an applewood handle. This Nineteenth Century model is crafted in identical fashion to a full size saw. From the Dr. Stephen Pierrel Collection. 60 - 120
17. TWO QUIRK OVOLO WITH SQUARE MOLDING PLANES, both by J. Killam, Glastenbury, Connecticut. Both are marked with Killam's distinctive "shield"imprint. It is marked as well as the owner initials "O.B.". From the Donald Nesslage Collection. 80 - 160
18. An unusual COMBINATION LETTER OPENER AND KNIFE having an IVORY handle and a penknife type blade. It is in excellent condition and embellished on thandle with rule graduations. From the John Meneely Collection. 60 - 120
19. An original PEN AND INK LINE DRAWING of the Stanley "Imp" by Shirley Richardson, Quincy, California. This drawing by Shirley, who was a direct descendent of the tool-making Stanley's and a noted collector of Stanley rules, was produced for the Stanley 150th Anniversary Celebration in 1993. It is signed and dated by the artist and has been professionally matted and framed for display. The drawing itself measures 8 inches in width and 15 inches with the frame. Many collectors fondly recall the Stanley 150th Anniversary "Convention" and this one-of-a-kind drawing is a great remembrance. 75 - 150
20. A SPIRAL RATCHET SCREWDRIVER by the Goodell-Pratt Company, Greenfield, Massachusetts, patented May 12, 1908. It is in superb condition. 50 - 100
21. A SMALL ROSEWOOD BLOCK PLANE that shows very little evidence of ever having been used. 60 - 120
22. TWO ROSEWOOD VIOLIN MAKER'S PLANES including round and rabbet types. Each is marked with the initials "R.M." 50 - 100
23. A SPECIAL PURPOSE SEAM ROLLER, patented February 10, 1874 and having a solid brass body. 75 - 150
24. A rare and early "MAGNETIC TIMEKEEPER" compass as patented and produced by Dwight L. Smith of Waturbury, Connecticut. The base of the device is marked with the August 23, 1870 date of the United States Patent issued to Dwight and the name of the inventor. The cover has a blown out image of a personifictaion of the sun as well as the "Magnetic Timekeeper" designation. It is in top collector quality condition. 100 - 200
25. A BRONZE VIOLIN MAKER'S PLANE having a ceramic knob at the heel. This NIneteenth Century plane has a most appealing uniform medium gold patina. From the John Meneely Collection. 100 - 200
26. An UNUSED CAP IRON for an early STANLEY No. 9 mitre plane by STANLEY. This solid cast type iron fits the early "Type 2" horizontal adjustment No. 9 plane. An extremely rare Stanley plane in essentially unused condition. 175 - 350
27. A CAST IRON JOINTER GAUGE, No. 38, by the Millers Falls Company, Millers Falls, Massachusetts. This early cam lock gauge is in nearly new condition in its original pasteboard box that retains its original "picture" label. 125 - 250
28. A FULLY BRASS BOUND 3" CALIPER RULE, No. 100, by the Upson Nut Company, Unionville, Connecticut. This configuration of solid body three-inch caliper rule was apparently only produced by Upson. It is marked with the maker name, but not the product number. This example is in top collector quality condition. 90 - 180
29. A reprinted edition of the APPLETON'S DICTIONARY OF MECHANICS by D. Appleton & Company, Boston, Massachusetts, complete in two volumes. Also included with the set is a supplemental volume that was included in the set at the time of original publication. 80 - 160
30. A MILLMEN'S TAPE MEASURE, No. 112 CH, by The Lufkin Rule Company, Saginaw, Michigan. This polished steel case and is in new condition in its original box. 60 - 120
31. A PATENT THREADING TOOL AND HAND DRILL COMBINATION as patented and produced by John Miller, Cambridge, Massachusetts in accordance with the specifications of the Miller Patent of September 26, 1899. This is the first example of this Nineteenth Century combination we have seen or offered for sale. 60 - 120
32. A PAIR OF CAST IRON BENCH BRACKETS, No. 203, by STANLEY. These special purpose tools were patented on March 16, 1915 by prolific Stanley inventor Edmund A. Schade. They are in excellent collector quality condition. 50 - 100
33. A MINIATURE BOXWOOD SMOOTHING PLANE by master miniaturist and all around good guy Bill Carter of Liecester, England. Carter's imprint is stamped on the toe of this artfully crafted and fully functional plane. 100 - 200
34. TWO SOLID EBONY SCREW BOXES, each with a matching tap. 5/8" and 3/8" sizes are included. One is marked with the owner imprint "Archd. Alexander", who may also have been the maker. Both are in top collector quality condition and could be put directly to use. 125 - 250
35. TWO NAVIGATOR'S IVORY RULES including one "Sector" type and a scale rule. Both are crisp, clean and white and in top collector quality condition. From the John Meneely Collection. 100 - 200
36. THREE HAND CRAFTED MACHINISTS TOOLS including a brass die stock of French manufacture; a hand made straight edge dated "1858"; and a caliper dated "1852". 60 - 120
37. A COMPLETE SET OF NINE MORTISE MACHINE CUTTING IRONS, all by the H.B. Smith Company, Smithville, New Jersey. Sizes range from 1/4" to 3/4" widths in this essentially unused set. 90 - 180
38. A PATENT PRECISION KNOT TYING DEVICE as patented by Robert W. Barker, Providence, Rhode Island on January 5, 1926. Designed to facilitate the tying of looped knots of the sort used in the textile industry, this device was likely so cumbersome to use that those who had been tying such knots by hand for generations found it laughable. This example is in brand new condition in its original box. A gizmo. 60 - 120
39. A PATENT SCREW HOLDING SCREWDRIVER by C.A. Mann & Company, Buffalo, New York, patented May 16, 1898. It is in nearly new condition. 60 - 120
40. A REFITTED "GAGE" TYPE PLANE having new wood and handles. It is marked with the owner imprint "J.M.M Williams" and is also marked with the designation "15" on the toe. The base of the plane is fully faced with a polished metal sole affixed by countersunk screws. The entire idea behind the Gage Patent planes was to allow the frog to be moved to regulate the throat as the sole wore away, so the "improvements" by Mr. Williams seem to have obviated the need for the Gage mechanism. He did, however, do a great job in doing so. A mechanically interesting plane in top collector quality condition. 80 - 160
41. A REFITTED "GAGE" TYPE PLANE having new wood and handles and a steel faced sole, This plane, which has a mother of pear button inset in the top of the front knob came together with Lot 40 and is identically fitted out. 100 - 200
42. An unusual HANDLED SKEW BLADE BRONZE PLANE. This low profile plane appears to have been designed to work in a space having very low overhead. The turned knob on the extension handle is fashioned from Macassar Ebony. 60 - 120
43. An uncomon SIX-INCH BLADE DRAW KNIFE by A.W. Crossman and Company, West Warren, Massachusetts. This highly polished edge tool is in brand new, unused condition. The way it would have appeared in a hardware store in the 1870's. Extra nice. 80 - 160
44. A PATENT QUICK ADJUST PIPE WRENCH by the Hammond Manufacturing Company, Boston, Massachusetts, patented April 3, 1900. This lever actuated quick-adjust wrench is shown in the Schulz book on Antique & Unusual Wrenches as No. 676. 60 - 120
45. A ROSEWOOD HANDLE RATCHET BIT BRACE, No. 813-10, by STANLEY. This brace is in a fitted wooden box with a full set of auger bits. All are in top collector quality condition. 50 - 100
46. A RARE BAKELITE BODY TAPE MEASURE having brass fittings, by Chesterman and Co., Ltd., Sheffield, England. It is in new condition in its original box. 50 - 100
47. An EARLY BRASS BODY CORKSCREW having a turned IVORY handle by Cope and Cutler, Birmingham, England. This mechanically interesting device has a threaded handle that turns the screw when pushed. It is fitted with a brush for removing wine sediment and an embossed plate bearing the designation "Patent". 150 - 300
48. An unusual QUADRUPLE INSIDE BEVEL FOLDING RULE by J. Rabone & Sons, Birmingham, England. Each of the four bevels is imprinted with a different architect's scale. This uncommon Rabone rule is marked with the maker name and is in nearly new condition. 150 - 300
49. A MASSIVE ROSEWOOD BLADE "T" bevel having an embossed brass plate marked with the designation "Warranted Superior". This finely crafted bevel is in brand new condition. The rounded end of the blade is covered with inlaid strips of brass plate to protect the wear point. A very pretty tool. 100 - 200
50. A SCREW LOCK ARM APPLEWOOD PLOW PLANE of sculptural form. This pretty plow has fixing screws and a depth stop fashioned from boxwood. The boxwood depth stop has a most appealing indented and beaded form and the plane shows very little evidence of use. A very pretty plane. Highly recommended. 100 - 200
51. A HANDLED SASH SCRIBE MOLDING PLANE by James Panton, Aberdeen, Scotland. Handled sash scribe molding planes seem to have been a Scottish specialty. This one is in top condition and could be put back to use, if necessary. A decidedly different special purpose woodworking plane. 175 - 350
52. A TWENTY-SIX INCH LENGTH ETCHED "VICTORY" SAW, No. D 15, by Henry Disston & Sons, Philadelphia, Pennsylvania. This pristine rosewood handle saw is marked with the designation "Lightweight". 80 - 160
53. An early SPECIAL PURPOSE ELECTRIC METER housed in a hinged cherry wood case and having a chamfered bezel. The original function of this device is not known. 80 - 160
54. A PATENT COLLAPSIBLE HATCHET by the the B.H.S. Manufacturing Company, Detroit, Michigan, patented September 29, 1960. This is the classic "Two guys in a garage with an idea" that has driven American invention from the outset, albeit writ one guy larger. This device was the brainchild of William Burdis of Royal Oak, Michigan; Frank Helfrick of Garden City, Michigan; and Frederick Scott of Pontiac, Michigan. We have no idea where the name of the "B.H.S." company may have originated. Yet another Great Idea whose time never came and a great collectible tool. 100 - 200
55. TWO EXTRA CLEAN HAND SAWS including a Simonds eight-point No. 7 and a Richardson No. 7 in the eight-point size. Both are in excellent working condition and retain nearly all of their original etching on the blade. 60 - 120
56. A PATENTED JEWELER'S PARALLEL JAW PUNCH by Henry R. Russell, Swarthmore College, Pennsylvania, patented March 13, 1877. This early and uncommon special purpose tool is marked with the patent date and is in top collector quality condition. 60 - 120
57. A CASED PRECISION THERMOMETER by J. Hicks, Hatton Garden, London, England. This scientific use theremometer dates from the Nineteenth Century. It is in top condition in its original leather case. 80 - 160
58. A very pretty PAIR OF OAK AND WALNUT DIVIDERS having pewter tips and a walnut wing. From the William Eviston Collection. 80 - 160
59. An extra clean COVE AND ASTRAGAL MOLDING PLANE by J.C. Jewett, Waterville, Maine. The toe of this plane has been boldly struck with the "A" desgnated imprint of this uncommon Maine maker, whose mark rates two stars for rarity in AmericaWooden Planes, Fourth Edition. The plane appears never to have been used. Perfect. 80 - 160
60. A SOLID LIGNUM VITAE RABBET PLANE having a massive wedge and a skew set iron. A dramatic tropical hardwood plane in excellent working condition. From the William Eviston Collection. 200 - 400
61. A SUPERB MINIATURE VERSION OF THE SARGENT NO. 1507 1/2 "LADYBUG" RABBET PLANE as produced by noted miniaturist Paul Hamler. Absolutely identical in all respects, down to the last screw and stop, to the original plane, this tool is fashioned from nickel plated cast bronze and is in brand new condition. A great little plane. 150 - 300
62. An early AMERICAN SHIPWRIGHT'S RABBETING PLANE. This cross between an Eighteenth Century American and European rabbeting plane is fashioned from Yellow Birch and has a relieved type wedge. 100 - 200
63. FIVE UNUSED MOLDING PLANES, all by Bensen and Crannell, Albany, New York. Included are a set of four beads in the 3/8", 1/2", 3/4", and 1" sizes; and a 1" size astragal. As nice as they come. 100 - 200
64. A KNUCKLE JOINT BLOCK PLANE, No. 18 1/4, by STANLEY. This non-adjustable throat "knuckle joint" plane retains some. 95% of its original finishes. 90 - 180
65. A MINIATURE BRASS GEAR DRIVE SAW of Nineteenth Century manufacture having a heart cutout pattern in the legs. It is in excellent collector quality condition. 80 - 160
66. A PAIR OF HOLLOW & ROUND MOLDING PLANES by Copeland and Company, Warranted. The origianl paper hardware store labels from Davey & Doolittle of Burlington, Vermont remain on the handles. 100 - 200
67. An early CUBAN MAHOGANY SPIRIT LEVEL having a "Hudson River" type plumb view vial. It is in clean and sound condition. 80 - 160
68. THREE CONTEMPORARY MOLDING PLANES including two by "F.H. Borrmann, Eastham, Massachusetts". One is dated "1977" and the other "1980". A third miniature plane bears the imprint of "I. Blower". Jim Blower was of Scottish birth was a noted Toronto stairbuilder in the last quarter of the Twentieth Century. His miniature planes were provided as keepsakes to his friends and fellow collectors. 80 - 160
69. An ADJUSTABLE WASHER CUTTER, No. 41, by the Goodell-Pratt Company, Greenfield, Massachusetts . This device, which was designed for use in a brace, is in new condition in its original box. 100 - 200
70. An early QUIRK ROUND AND ASTRAGAL MOLDING PLANE by E. Safford, Albany, New York having an early Albany imprint. This the "A1" designated imprint used by Safford rates five stars for rarity in American Wooden Planes. 80 - 160
71. A rare planemaker-marked BOXWOOD & BRASS MARKING GAUGE bearing the imprint of Troy, New York planemakers R. & L. Carter. This partnership worked from ca. 1842 to 1846 only. The head has been clearly marked with the Carter imprint. A pair rectangular brass plates having rounded ends are set into the face of the gauge--a pattern that was unique to this maker. 100 - 200
72. A EIGHTEENTH CENTURY YELLOW BIRCH TABLE JOINT MOLDING PLANE by Jo. Fuller, Providence, Rhode Island. This Eighteenth Century classic has been boldly struck with the Fuller imprint. From the William Eviston Collection. 100 - 200
73. THREE EXTRA CLEAN HAND SAWS, all No. D 8, by Henry Disston and Sons, Philadelphia, Pennsylvania. Included are nine and twelve-point crosscut saws and a five point rip saw having a contoured applewood handle. All are in excellent condition and could be put directly to work. 80 - 160
74. THREE PHILADELPHIA MAKER MOLDING PLANES including a John Bell sash cope; a Bibighaus sash cope; and a John Bell reed and follow. All are in top collector quality condition. 100 - 200
75. A rare COMPARATIVE SCALE FOLDING RULE by D. Claussen and Company, Bremmerhaven, Germany. This uncommon square-section four-fold rule is marked with the designation "Englisch" on the face graduated in inches and "Rhennish" on the other. 125 - 250
76. A HARDWOOD HANDLE SCREWDRIVER, No. 171, having an 8" blade, by Stanley Tools. It is in new condition in its original box. 60 - 120
77. A PATENT POCKET NAIL PULLER by E.G.L. Company, Boston, Massachusetts, patented may 27, 1902 by Goodell Pratt. 50 - 100
78. TWO SPECIAL PURPOSE SPOKE SHAVES including a bronze rail shave and a double scratch beader. Both are in top collector quality condition. 80 - 160
79. A CIVIL WAR ERA FACINE KNIFE by the Underhill Edge Tool Company. These tools were carried in a pack and then fitted on the end of a branch as needed for forming defense works from small trees or clearing the way for a marching army. The face has been boldly struck with the 1860's imprint of this prominent New England edge tool maker. 80 - 160
80. A STEPPED SET OF FOUR BORING MACHINE AUGER BITS, all by the Snell Manufacturing Company, Fiskdale, Massachusetts. Included are sizes in the 2"; 1 1/2"; 1 1/4" and 1" widths. All are in nearly new condition and could be put directly to work. 120 - 240
81. A superb example of "THE BOSS" BORING MACHINE as produced by the Buckeye Manufacturing Company, Anderson, Indiana. It is in excellent condition, retaining some 95% of its original original black japan finish. One of the best examples of this desirable machine that we have seen or offered for sale. 250 - 500
82. An example of MCGRATH'S PATENT "HOLDFAST" BEVEL as produced by the Southington Hardware Company, Southington, Connecticut under the terms of the McGrath Patent of December 15, 1914. This rare six-inch nickel-plated example is in nearly new condition. 90 - 180
83. An extremely rare PROMOTIONAL WATCH FOB by the Goodell-Pratt Company, Greenfield, Massachusetts. This solid pewter fob is imprinted with a raised image of the Goodell-Pratt mascot "Mr. Punch" an elf like creature whose push drill weapon would make him more than a match for the Michelin Man, the Pillsbury Dough Boy or other like creatures. 125 - 250
84. A RAFTER AND POLYGON GAUGE by F. Reissmann, West Point, New York, copyright 1897. This late Nineteenth Century scale was used for calculating the length of hip and valley rafters in home construction. It is in essentially unused condition. 100 - 200
85. TWO NEW ENGLAND MAKER SASH MOLDING PLANES including an H. Chapin screw arm type and an example by J.M. Taber having threaded steel screws through the body. Both are in top collector quality condition. From the Donald Nesslage Collection. 90 - 180
86. A finely crafted ADJUSTABLE CHAMFER PLANE having an aluminum depth stop and a brass stop screw. From the Carl Bostrom Collection. 80 - 160
87. An early and very finely crafted IVORY HANDLE GIMLET. This very well made tool looks to date from the 1850's. 120 - 240
88. TWO EARLY SHOE MEASURE RULES, both by Belcher Brothers Makers, New York, New York. Included are folding and fixed type examples. Both are in top collector quality condition. 60 - 120
89. A MACHINIST'S HAMMER, No. 94, by the H. Cheney Company, Little Falls, New York. It has its original black finish and 100% of the original label. It is brand new with tissue wrap. 80 - 160
90. FIVE ORIGINAL BOX ITEMS, all by STANLEY. Included in this grouping are No. 2 and No. 4 trammels; level sights No. 2 and No. 138; a No. 34 V eight-inch length precision bench level. All are in top collector quality condition. 100 - 200
91. An example of GOODELL'S PATENT AUTOMATIC SCREWDRIVER, No. 2, by Goodell Brothers, Greenfield, Massachusetts. This example of the Goodell Patent of July 22, 1890 is in new condition in its original pasteboard box, which is marked with the designation "Made for H.H. Mayhew and Company, Shelburne Falls, Massachusetts. 100 - 200
92. A LOT OF FOUR EARLY TOOL CATALOGUES including a Nineteenth Century book of tinners tools by the Stark Tool Company of Buffalo, New York; a Goodnow & Wightman catalogue; a paperbound book of the offerings of the Buffalo Forge Company; and a copy of "The Steel Square" by Hodgson. Men knowledgeable in the intricate workings of the steel square and its many scales are much in demand at cocktail parties to wax eloquent on the subject and thus convince guests who have stayed overlong to head home and go to bed. 80 - 160
93. A PORTABLE BENCH MOUNT MACHINISTS VISE by the Goodell-Pratt Company. Nearly all of the original paint and original decal remain on this immaculately well preserved tool. 80 - 160
94. A COLLECTION OF THREE EARLY GUTTER PLANES including examples by New Hampshire maker S. Sleeper; C. Wilson, Dracut, Massachusetts; and a long cherry example having wide chamfers that is not marked with a maker name. From the David Brandt Collection. 100 - 200
95. A FOLDING HANDLE DRAW KNIFE by T.H. Witherby, Winsted, Connecticut complete with a pair of adjustable chamfer guides. This example is in nearly new condition in its original box. The corners of the box have been taped, but the tool is in superb condition. 125 - 250
96. A rare EARLY STYLE DRAW KNIFE by Underhill, Leighton & Lufkin, Chester, New Hampshire. The blade is marked with the name of this partnership and the designation "8" on the blade. A perusal of the "History of Chester, New Hampshire" on the Internet recounts the vicissitudes of edge tool making in Chester in the the 1850's, and, while not specifically mentioning this partnership, mentions the names of all three of the principals as having operated the same edge tool enterprise in succession, either together or in partnership with each other. This is the only example of this mark that we have seen and the first we have heard of this edge tool making concern. A rare maker marked drawknife that captures a snapshot of the history of edge tool making in New Hampshire. 100 - 200
97. A rare LOG MARKING AXE HEAD that imprints a most unusual "helix" pattern. Axe and log hammer combinations are not common and this mark is the first we have seen. 100 - 200
98. A scarce "BLIND MAN'S" FOLDING RULE, No. 762 B, by the Lufkin Rule Company, Saginaw, Michigan. This printed number rule is in superb collector quality condition. A rare Lufkin rule. 125 - 250
99. An early SOLID BRASS SHIP'S WHISTLE. This classic nautical item retains its original rosewood handle and it has been mounted on an oak base for display. It has been professionally cleaned and polished and is in excellent working condition. From the John Meneely Collection. 200 - 400
100. An UNIQUE FOUR-INCH SIZE SLIDING "T" BEVEL, No. 25, by STANLEY. This early example of the Stanley No. 25 series is not marked with the Stanley name, but the form is unmistakable. Both the fixing screw and the blade retain their original blued finish and the bevel looks to never have been used. We suspect that in the earliest days of production a limited number of these were produced but, owing to their limited application, were soon discontinued. A rare and possibly unique Stanley tool. 200 - 400
101. A TULIP PATTERN FRAME NAUTICAL SEXTANT IN A FITTED MAHOGANY CASE by G. Mager, Brake (Germany). This finely crafted rosewood handle tool is in superb condition in its original mahogany case. An identical example has been noted in the Museum of America and the Sea at Mystic Seaport, where it is noted that it is "...of English manufacture". From the John Meneely Collection. 350 - 750
102. An EARLY BOARD MEASURE RULE by R.B. Haselton, Contoocook, New Hampshire. Fully 95% of the original yellow lacquer finish remains on this pristine example, which has been protected throughout its long life by the presence of its fitted felt sleeve. 100 - 200
103. A PAIR OF EARLY BRONZE TRAMMELS having "Heart" pattern cutouts and knurled fixing screws. A pretty pair of trammels. 100 - 200
104. An example of the PALMER'S PATENT SMOOTHING PLANE as produced by the Metallic Plane Company, Auburn, New York. This non-adjustable type was patented on October 19, 1869. It is in clean, sound and complete condition. 100 - 200
105. An extra clean CUBAN MAHOGANY LEVEL by Mulliken and Stackpole, Boston, Massachusetts. This early example retains its original hardware store price marking and some 98% of its original finishes. A great early level in top collector quality condtion. 100 - 200
106. THREE EARLY MAHOGANY SPIRIT LEVELS, all by L.L. Davis, Springfield, Massachusetts. One retains portions of its original paper label. Examples in the 26" and 30" sizes and a 30" example having double plumb vials are included in this grouping. 100 - 200
107. An early BRASS BOUND SPIRIT LEVEL, No. 1, by the Millers Falls Company. This well made level has the early style level vial adjusting screws. Much of the original finish remains. 100 - 200
108. TWO EXTRA CLEAN MOLDING PLANES, both by E.W. Carpenter, Lancaster, Pennsylvania. Included are a 1/4" reed and follow and a 1/2" dado molder. The reed and follow is fully boxed. From the Carl Bostrom Collection. 100 - 200
109. A CUBAN MAHOGANY PLUMB AND LEVEL by H.M. Pool, Easton, Massachusetts. This very nicely patinated level is in nearly new condition. 175 - 350
110. A LOT OF EXTRA CLEAN NEW YORK MAKER MOLDING PLANES including an R. Harron dado set of 3; two E. Baldwin hollows. The dado planes include 3/8", 1/2" and 7/8" widths. All are in top collector quality condition. 90 - 180
111. A PAIR OF FANCY BRONZE TRAMMELS, No. 3, by STANLEY. These nearly new trammels are mounted on a Brazilian Rosewood beam having ivory tips on the ends of the beam. A very showy tool. 100 - 200
112. An example of MILLEA'S EMERGENCY WRENCH by the Universal Tool Company, Springfield, Massachusetts. This wrench, which is listed in the Schulz book as Number 819, was patented on February 10, 1903. A nice example of a rare patented multi-purpose wrench. 100 - 200
113. THREE EARLY SPIRIT LEVELS by Stratton Brothers, Greenfield, Massachusetts. Included are a thirty-inch No. having brass end caps; a No. 2 fashioned from Cuban Mahogany 30"; and a 30" No. 03 made from cherry. All are clean, sound and clearly marked. 125 - 250
114. An interesting BOAT BUILDER'S LEVEL made from mahogany. This well made "T" form level has plates brass plates from the "Curtis Flying Boat" and "Niagara Motor Boat Builders" affixed to its face. An intresting level of unknown origin. It is in essentially unused condition. 200 - 400
115. A SOLINGEN GERMANY TOOL KIT including all original tools and a fitted leather case. 100 - 200
116. A LEVER ACTION PIPE WRENCH, No. 0, by The Billings and Spencer Company, patented June 6, 1871. It has full nickel plating. 80 - 160
117. An EARLY NINETEENTH CENTURY FIREPLACE TRIVET marked "Shellington, England". It retains its original brass finial and appears to date from the 1820's, or thereabout. The brass finial is formed in sections and has a visible seam in the manner of the metal work of this early period. 100 - 200
118. A BIT AND SQUARE LEVEL, No. 44, by STANLEY, patented November 16, 1886. This ca. 1930's trademark example is in brand new condition in its original pasteboard box. 80 - 160
119. A MANILA CORDAGE CALIPER RULE by Kerby and Brother Makers, New York, New York. This uncommon non-advertising version has inch graduations on the back and is designed to gauge only Manila rope. It is in top collector quality condition. 100 - 200
120. An EARLY PATENT COMBINATION WRENCH by J.W. Currier, Newbury, Vermont, patented May 16, 1871. Much of the original nickel plating remains on this "jack of all trades" wrench. It incorporates the functions of pliers, a hammer, leather punch, tack puller, screwdriver and can opener into a single device having so many bends and points that using it for any of those tasks is rendered virtually impossible without imposing great risk to the user. A great collectible wrench. 125 - 250
121. A most unusual SAW CUT WOODEN PLANE by Cowell & Chapman, Newcastle, England. Fashioned in the form of a wooden molding plane designed to cut a narrow rabbet, this tool has a saw blade all along the length of the base to cut a fixed depth saw kerf. Its original intended function is unknown to us and may have been to its original owner as it appears never to have been used. A curiosity. 100 - 200
122. A HANDLED MINIATURE SMOOTHING PLANE marked with the designation "G.K.M. Maker" and marked with the date "December 31, 1982" on the toe. It is nicely accented with an IVORY wedge and knob and is in top collector quality condition. A pretty and finely crafted miniature plane. 125 - 250
123. A PAIR OF EARLY SUGAR NIPPERS of Eighteenth Century form. This early kitchen essential is in excellent overall condition. 80 - 160
124. An extremely rare HEXAGON HEAD PATENTED PUSH DRILL by the Chicopee Tool Company, Chicopee, Massachusetts. This nickel plated spring-driven tool is marked with the date of the July 10, 1883 United States Patent issued to John H. Hoage of Chicopee, Massachusetts. This is only the third example of this rare and early drilling tool that we have seen. 125 - 250
125. A PATENT INCLINOMETER LEVEL by the Gibson Plumb and Level Manufacturing Company, Lahoma, Oklahoma. This precision level was patented by William A. Gibson of Enid, Oklahoma Territory on June 25, 1907. It is in top collector quality condition. For those of you keeping score at home, Oklahoma was admitted to the Union on November 17, 1907 as the forty-sixth state. 400 - 800
126. A "MODEL 22" U.S. NAVY CHRONOMETER WATCH, No. 897-1941, by the Hamilton Watch Company, Lancaster, Pennsylvania. This World War II era instrument is in nearly new condition in its original Mahogany case. The back of the instrument is engraved with the designation "Bureau of Ships". From the John Meneely Collection. 175 - 350
127. An UNUSUAL PRECISION ADJUSTABLE RABBET PLANE having multiple adjustments. It is marked on the side with the designation "Pat. Appl'd For". It retains its full original cutting iron and is in top collector quality condition. 150 - 300
128. An early and nearly perfectly preserved PATENT INCLINOMETER LEVEL by L.L. Davis, Springfield, Massachusetts. This example of the L.L. Davis Patent of September 17, 1867 retains nearly all of its original gilt decoration on the elaborate filigree body. Nearly all of the original lacquer finish remains on the face, which is marked with the maker name and patent name. Extra special. 400 - 800
129. A MINIATURE IVORY RABBET PLANE fitted with a nicely contrasting wedge of Brazilian Rosewood. This very well made plane is in top collector quality condition. From the John Meneely Collection. 200 - 400
130. A THREE INCH WIDTH CARPENTERS SLICK by the Hubbard Hardware Company, Middletown, Connecticut. This bevel edged square retains its original turned handle and is in excellent working condition. 90 - 180
131. THREE EXTRA CLEAN MARKING GAUGES, all by STANLEY. Included are a 65 3/4 pencil type marked with the "Sweetheart" trademark; a No. 70 Mahogany slitting gauge; and a No. 65 boxwood mortise gauge. All are in top collector quality condition. 125 - 250
132. A rare SOLID ROSEWOOD SPIRIT LEVEL by the Russell and Erwin Manufacturing Company. It has a great grain pattern to the Brazilian Rosewood and is in excellent collector quality condition. From the William Eviston Collection. 125 - 250
133. TWO SIX-INCH SIZE EXAMPLES OF THE HOWARD PATENT BEVEL, both by the Star Tool Company, Middletown, Connecticut. One is fashioned from Mahogany and the other from Brazilian Rosewood. Both are marked with the date of the November 5, 1867 U.S. Patent issued to Leonard D. Howard of St. Johnsbury, Vermont. 150 - 300
134. A ONE-FOOT, FOUR-FOLD FOLDING RULE with caliper of IVORY and German silver. The distinctively shaped caliper tip on this rule is evocative of those found on the early caliper rules produced by A. Stanley & Company. 125 - 250
135. TWO EXTRA CLEAN SHIPWRIGHTS MOLDING PLANES, both by J.R. Tolman, Hanover, Massachusetts. Included are a 1/2" double tongue and groove and a compass sole hand rail plane. Both are in clean and sound condition and clearly marked with the Tolman imprint. From the David Brandt Collection. 120 - 240
136. A CAST IRON SPILL PLANE by Edward Preston & Sons, Birmingham, England. This uncommon bench mount plane has a minor chip from the casting, but is otherwise in excellent condition. 100 - 200
137. SIX EARLY STYLE BRASS SCALE WEIGHTS including 4 oz. and 8 oz. sizes as well as 1, 2, 4 and 7 pound weights. All have been professionally cleaned and polished. 125 - 250
138. A classic "YANKEE" PLOW PLANE fashioned from Yellow Birch construction. This classic early plane has a riveted skate and a is marked with a distinctive "dagger" imprint on the heel. 120 - 240
139. A WORKING SET OF THREE PLANEMAKERS FLOATS including angled and tapered types. Two marked with the designation "T. & Co." are included in this grouping. 175 - 350
140. THREE EXOTIC WOOD SHIPWRIGHT'S PLANES including a Cuban mahogany trying plane, a mahogany spar plane and a mahogany compass sole smoother. 150 - 300
141. FOUR SPECIAL PURPOSE MOLDING PLANES including a 1/2" double tongue and groove; a 1/2" tongue and groove pair; and a 1" width hollowing plane. All are by Dutch makers. 120 - 240
142. An early ENGLISH BLOWTORCH for gas jet use. It is in its original Mahogany box and bears the owner mark in ink of one "Geo. T. Ansell". 100 - 200
143. A PROMOTIONAL FOOD CHOPPER by Henry Disston and Sons, Philadelphia, Pennsylvania. This item includes its original printed Disston "Complements of" tag. It is in new condition in its original pasteboard box. 80 - 160
144. An example of TRYON PATENT COMBINATION WRENCH by the Hartford Hardware Company, Hartford, Connecticut. This wrench was patented on January 29, 1901 by Edward E. Tryon of Hartford, Connecticut. Neither the maker name or patent information are marked on the wrench, but its form is unmistakable. 80 - 160
145. An early PATENT COMBINATION TOOL HANDLE by Albert Landon and Louis Martel, Rutland, Vermont, patented September 6, 1892. This multi-tool has a knife, a scraper, a screwdriver, reamer, etc. that fold away Swiss Army Knife style when not in use. 125 - 250
146. A QUIRK OGEE WITH ASTRAGAL MOLDING PLANE by M. Copeland, Warranted. This pristine complex molder is in essentially unused condition. It was found recently with a group of planes in Northern Maine and is marked with the designation "C.R". 125 - 250
147. An ELABORATELY MACHINED AND DESIGNED PRECISION ADJUST DIVIDER designed to accommodate either a pencil or steel scribe. The tip can be precisely adjusted by depressing the spring lock arms that hold it in place. When not in use, the steel scribe is threaded and can be screwed into the top of one of the legs. This tool comes to us from Northern Maine, where long winters and a jug full of "blood thinner" may have led to its creation. A great collectible tool. 175 - 350
148. FOUR EXTRA CLEAN TOOL HANDLES including large and small examples by the Millers Falls Company, a Bridgeport Hardware type and an unmarked example of the Fray Patent. All are in top collector quality condition. 75 - 150
149. TWO EARLY HAND FORGED COOKING UTENSILS including a waffle type cookie maker having six distinct patterns and a revolving trivet that is missing one of its legs. We shall refrain from referring to it as a "bivet". 100 - 200
150. An EARLY EIGHTEENTH CENTURY UNSPRUNG OGEE MOLDING PLANE by Ce. Chelor, Living In Wrentham. This exceptionally well preserved three-line imprint plane has been boldly struck with the imprint of one of the very first professional American planemakers. This plane is in pristine, untouched condition, never having been despoiled by so much as an owner imprint. It measures 9 7/8" in length and has a most appealing golden brown patina. This plane is, without question, the finest molding plane by Chelor that we have ever offered for sale. Extra nice, and highly recommended. 3500 - 7500
151. An early SLIDE TYPE LOG CALIPER by R.B. Haselton, Contoocook, New Hampshire. The name "Perry Hunt, Gilford, N.H." has been marked on the fitting of one arm and may be the mark of the original owner. This clasic lumber tool is in clean and sound condition and ready to display. 200 - 400
152. A KNIFE HANDLE TOOL HANDLE by the Utica Cutlery Company, Utica, New York. This uncommon, bakelite handle American-made set is in excellent condition in its original leather pouch. 100 - 200
153. A TWO-FOOT, FOUR-FOLD FOLDING RULE, No. 72 1/4, by the Upson Nut Company, Unionville, Connecticut. This most unusual Upson rule has a square joint and is in nearly new condition. 100 - 200
154. A rare COACHMAKERS PLOW PLANE of diminutive form by Griffiths, Norwich (England). This plane was mad shorter than a standard plow to accommodate the reduced scale of the work of a coachmaker. The skate is curved on each end for cutting panel grooves in curved frame pieces. There is a repair to the rear arm, but the plane is otherwise clean, complete and flawless. 150 - 300
155. A SCREW ADJUST NUT WRENCH by the Globe Wrench Company, Ipswich, Massachusetts, patented march 15, 1910. This wrench is shown in the Schulz book on unusual wrenches as No. 393. It is in nearly new condition. These wrenches are sometimes found bearing the maker imprint Sunapee, New Hampshire. 80 - 160
156. An early PENNSYLVANIA MAKER OGEE MOLDING PLANE by A. Etzler. The maker name has been boldly struck on the toe of this early molder. The imprint has been assigned the "UR" rating in American Wooden Planes, Fourth Edition. 250 - 500
157. An IVORY FOUR FOLD FOLDING RULE by J. Rabone & Sons, Birmingham, England. This well preserved caliper rule with caliper has additional scale graduations on the outside edges. It is clean and white. showing only minor yellowing from age. 125 - 250
158. An EARLY PATENT CAST IRON SCRAPER by S.C. Tatum & Company, Cincinnati, Ohio, patented June 10, 1884. This example of the patent of John Keiser of Cincinnati, Ohio in excellent overall condition. Fully 90% of the original black japan finish remains on this Nineteenth Century woodworking tool. 125 - 250
159. A MINIATURE MODEL OF THE EARLY STANLEY NO. 50 PLANE by Paul Hamler. This elaborately decorated plane is cast in bronze and measures only four inches in length. The plane is an exact scale replica of the original and all of the screws and adjustments work in the same way as on the original. These planes were produced in a very limited number and are not likely to reappear. Opportunity knocks. 200 - 400
160. A SALESMAN'S SAMPLE "HORSE SHOE BRAND" CLOTHES WRINGER by the American Wringer Company, New York, New York. This countertop size model would have been used to demonstrate the merits of the Horse Shoe Brand wringer to a prospective buyer. This example, which looks to date from the 1890's, is in nearly new condition. 200 - 400
161. TWO CA. 1800 BORING TOOLS including a spring lock brace and a fancy "Gent's" brace. 100 - 200
162. A FANCY ROSEWOOD MARKING GAUGE by Moseley and Simpson, Covent Garden, London, England. This exceptionally well preserved gauge has a screw adjust mechanism and has been boldly marked with the imprint of this London partnership. 90 - 180
163. A classic "YANKEE" PLOW PLANE having a yellow birch body. It is marked with the owner/maker imprint "J.L". 125 - 250
164. An example of the "THAYER PATENT" TACK HAMMER as produced by John Adams Thayer, East Boston, Massachusetts, patented June 24, 1862. It is in top collector quality condition and clearly marked with the patent date. 150 - 300
165. An early PATENT CAST IRON APPLE PARER by Moore Brothers, Fitchburg, Massachusetts, patented September 9, 1856. This unusual small size parer has a heart motif decoration to the gear wheel. It is complete and mechanically perfect. An uncommon cast iron parer in excellent collector quality condition. From the Eric Olson Collection. 125 - 250
166. A commemorative anniversary chisel set by STANLEY TOOLS. These chisel and mallet sets were produced to commemorate the 150th Anniversary of Stanley in 1993. The chisel set is regarded as one of the best of the line of commemorative tools produced for this occasion. We believe that the effort mounted by Stanley in 1993 revived a tradition of producing "special issue" tools that was much more common 50 to 100 years ago. Tools of this quality will likely never be produced again in such limited quantities or be available at such reasonable prices. An opportunity. 200 - 400
167. A CAST IRON DADO PLANE, No. 39, by STANLEY. Fully 98% of the original black japan finish remains on this pristine 1/2" size example. It is marked on the cutter fixing screw with the ca. 1930's "notched rectangle" trademark. 90 - 180
168. A 7 1/2" length SMOOTHING PLANE, No. O2, by Ohio Tool Company, Auburn, New York. A "must-have" for any collector of No. 2 size planes, this example has the distinctive maroon red japanning used on later examples of this plane. The cutting iron has the "Auburn, New York" trademark used after the 1893 merger of the Columbus, Ohio based Ohio Tool Company and the Auburn Tool Company of Auburn, New York. The body and cap have aged to a most appealing chestnut brown color and some 95% of the original paint remains. 250 - 500
169. A SOLID BRONZE HANDLED MITRE PLANE similar to the "Lancashire Pattern", but having a horizontally mounted cutting iron. This substantial and professionally made plane has lacquered beech handles and is in nearly new condition. 250 - 500
170. A PATENT UNIVERSAL COMBINATION PLANE, No. 55, by STANLEY complete with cutters. This pristine example is in nearly new condition and includes four boxes of irons, the screwdriver, instruction manual and all original accessories. 300 - 600
171. An early "HUDSON RIVER" TYPE LEVEL by J.M. Davison, New York, New York. This mahogany body level has dual plumb vials in the distinctive circular style used by this early maker. 100 - 200
172. A rare HIRAM G. LOOMIS PATENT SIGHTING LEVEL as produced by H. Chapin, Union Factory, patented July 7, 1868. The Chapin mark has been overstruck, but the patent information is clear. The first example of this level that we have offered for sale. 120 - 240
173. A rare MAGAZINE HANDLE POCKET SCREWDRIVER, No. 231, by the Goodell-Pratt Company. Nearly all of the original nickel plating remains on this example that is clean and complete in its original green and yellow box. 100 - 200
174. A EIGHTEENTH CENTURY DOVETAIL MOLDING PLANE. This most unusual early plane cuts a skewed dovetail groove for some unknown function. The first plane of this type that we have seen. It is in nearly new condition. A great Eighteenth Century woodworking plane. 150 - 300
175. A magnificent CASED SET OF EIGHT BRASS COACH MAKERS PLANES. All have ebony wedges and bone inlay in the bodies of the planes. All have been kept in excellent condition in their fitted felt-lined marquetry decorated finger joint case. Round, rabbet, groove, "V" groove and chamfer shapes are included in this delightful set. 1500 - 3000
176. An early MINER'S "STICKING TOMMY" CANDLESTICK HOLDER. These tools were used for providing light for miners in the days before the invention of carbide lamps. This example is in excellent collector quality condition. 100 - 200
177. A ROSEWOOD & BRASS DRAW GAUGE by A. Crawford, Newark, New Jersey. Crawford is reported to have worked in Newark from 1838 to 1841 only. The beam has been hand-scribed in the manner of the earliest tools of this type. 90 - 180
178. A SOLID ROSEWOOD SHIPWRIGHT'S JOINTER PLANE having an artfully crafted "D" type handle. This dramatically grained plane retains its full double cutting iron by Sheffield maker William Marples & Sons. It in nearly new condition. 300 - 600
179. An eight-inch length example of CHAPLIN' S PATENT SMOOTHING PLANE, No. 3, as patented and produced by O.R. Chaplin of Boston, Massachusetts in accordance with the specifications of United States Patent No. 126,519 issued to Chapline and Charles H. Ballard of Worcester, Massachusetts on May 7, 1872. Traces of the original nickel plating remain on the cast iron handles of this distinctive scalloped-side patented plane. The number designation and the Chaplin name are cast into the bed. The plane is absent any chips or breaks and is in excellent overall condition. A nice example of an early patented smoothing plane. 300 - 600
180. A FULL SET OF FIVE PLANEMAKERS FLOATS, all by Clark & Williams, Eureka Springs, Arkansas. All are in brand new, unused condition and could be put directly to use turning old jointer planes into valuable miniatures. 125 - 250
181. A SET OF EIGHT UNUSED SHIPWRIGHTS' CAULKING IRONS by Ward, Sheffield, England. All of the irons retain their with original decals and most of the original factory protective paint on the shaft. The blades are in factory sharp condition. Also included is the unused Live Oak (Quercus virginiana) caulking mallet. The best set of ship caulking tools we have ever offered for sale. 300 - 600
182. A "MANTEL CLOCK" PATENT INCLINOMETER LEVEL by L.L. Davis, Springfield, Massachusetts. This magnificent example of the early L.L. Davis Patent is in nearly new condition retaining some 99% of its original black japan finish and decorative gold striping. A superb example of a classic Nineteenth Century collectible American tool. 400 - 800
183. A PATENT ADJUSTABLE SMOOTHING PLANE, No. A 5, by Norris, London, England. This Post-War model is fitted with the patent adjustment mechanism and is in clean and usable condition. 300 - 600
184. An IVORY & GERMAN SILVER TWO-FOOT, FOUR-FOLD FOLDING RULE by J. Rabone & Sons, Birmingham, England. This classic dual inside bevel architect's rule has a high quality arch joint on the outside and bitted inside hinge fittings. The joints are extra tight joints and the rule has only the slightest yellowing. The inside hinge is graduated to function as a protractor. A classic rule in nearly perfectly preserved condition. From the John Meneely Collection. 250 - 500
185. A rare DOUBLE BEVEL ARCH JOINT TWO-FOOT, FOUR-FOLD FOLDING RULE of IVORY and German silver by T. Cooke & Sons, Ltd., London, York and Capetown. This interesting variation on the architect's rule has beveled edges on all of the inside faces. The rule is graduated with multiple scales and has a protractor scribed joint on the inside face. Only the very slightest yellowing is noted in this essentially bright white rule. From the John Meneely Collection. 350 - 750
186. A rare FOLDING IVORY PAPER CALCULATION RULE. This rule includes scales for all manner of trade-named paper weights, such as "Fool's Cap" "Elephant", etc. It has a brass arch joint on the main hinge, brass tips and bitted hinge joints. The outside edges are graduated with inch scales. The ivory is nearly as bright and white as the day it was made. Nice. From the John Meneely Collection. 500 - 1000
187. An IVORY IRON MONGER'S" FOLDING RULE by T. Aston, the Original Maker. This uncommonly configured rule is graaduated with multiple scales such as would have been used by a hardware and materials merchant. There is an outside caliper fashioned from German silver. The main joint is engraved with the names "James Mackelvie" and "J.G. Harkness". The rule has aged to a uniform medium yellow and is otherwise in perfect condition. From the John Meneely Collection. 500 - 1000
188. An EARLY PATENT DIAMOND TIP GLASS CUTTER by Karelsen, New York, New York. This staghorn handle diamond-tip cutter is marked with the date of the March 6, 1877 United States Patent issued to Jacques E. Karelsen of New York City for an "Improvement in Glazier's Diamond Holders". 100 - 200
189. An exceptionally clean SKEW-BLADE BLOCK PLANE, No. 140, by STANLEY. The cutting iron is marked with the ca. 1920's "Sweetheart" trademark on this superb example, which retains some 98% of its original black japan finish. 100 - 200
190. An early PAIR OF SUGAR TONGS by William Timmons and Son, Charlston, England. These spring action tongs have been professionally cleaned and polished and are ready to display. 100 - 200
191. A rare TWELVE-INCH LENGTH CHERRY SPIRIT LEVEL, No. 3, by STANLEY. This uncommonly short level is not shown in the Stanley catalogues as a standard size. This example may represent a special order or countertop display item. 125 - 250
192. An early MAHOGANY SPIRIT LEVEL having disinctively shaped ogee end plates formed of heavy cast brass. Appearance is ca. 1850's. 100 - 200
193. THREE ORIGINAL LABEL MOLDING PLANES, all by W.H. Pond, New Haven, Connecticut. Included are two beads and a hollow. All of the labels are of different colors, including red, yellow and green. 200 - 400
194. THREE EARLY NEW YORK MAKER SPIRIT LEVELS including two by J. and G.H. Walker and a mahogany level by Bagot in the 28" length. We have previously encountered the maker Bagot only in the cast iron square levels patented and produced under his name. 120 - 240
195. An INTERCHANGEABLE TOOL HANDLE by John Booth and Sons, Philadelphia, Pennsylvania. This superb example is in nearly new condition in its original wooden box with a wide range of original bits. 250 - 500
196. A HANDLED PATENT ADJUSTMENT FILLETSTER PLANE by D. Kimberly & Sons, London, England. Marked with the patent designation "No. 2848", the fence is adjusted by means of a key attached to the threaded steel center arm. A scarce and innovative adjustable plow plane. 200 - 400
197. A rare ADJUSTABLE FENCE TONGUE AND GROOVE MOLDING PLANE by A. Mathieson and Sons, Glasgow, Scotland. The plane is marked with the designation "Pat. appl'd. for" and has a weak imprint. The Mathieson quarter moon logo is weak, but legible. A scarce and mechanically interesting plane from Scotland's most prolific maker. 150 - 300
198. A classic TWO POLE "CAGEHEAD" BRACE having a friction chuck and an extra large head. 100 - 200
199. An EBONY AND IVORY ROLLING PARALLEL RULE by Dolland, London, England. This graphic navigator's rule has both graduated wheels and edges. The body and roller are formed from ebony and the edge banding and graduated wheels are of ivory. A finely crafted instrument in top collector quality condition. From the John Meneely Collection. 150 - 300
200. A TWO-FOOT, THREE FOLD FOLDING RULE of IVORY and German silver by John Rabone & Sons, Birmingham, England. This most unusually configured rule is sharp, white and crisp. It is also marked with the designation "Toye & Co., London & Liverpool". From the John Meneely Collection. 600 - 1200
201. An extra large PROOF CALCULATION SLIDE RULE of IVORY and German silver by J. Long, London, England. These rules were used by distillers to gauge the alcohol content of fermented and distilled spirits and by revenue agents to drive the brewers, vintners and distillers to drink. A nice example in top collector quality condition. From the John Meneely Collection. 150 - 300
202. An early HAND FORGED DOUBLE CALIPER having a basket handle form to the handle. This early hand forged tool has a most appealing smooth, dark patina. 125 - 250
203. THREE EXTRA CLEAN SPIRIT LEVELS including a Standard Rule Company 26" example in cherry; a Stanley No. 9 Mahogany level; and a Bristol Tool Company No. 15 Mahogany level. 100 - 200
204. An extremely rare ONE-FOOT, FOUR-FOLD FOLDING RULE, No. 3, by STANLEY. This fully brass bound caliper rule is clearly marked with the maker name and product designation. Some 95% of the original finishes remain on both wood and metal. From the James Doerflinger Collection. 200 - 400
205. A CUSTOM MADE EBONY SMOOTHING PLANE by Clark and Williams, Eureka Springs, Arkansas. This contemporary classic is marked on the tote with the tasteful zig-zag border imprint used by this planemaking partnership. Their work is by far the finest of those who have tried their hand at making wooden planes in the traditional manner and is equal to that of the Nineteenth Century planemakers, in our opinion. The plane is also marked with the designation "2000", denoting the year of its making. A contemporary classic. From the Dr. Stephen Pierrel Collection. 200 - 400
206. A PAIR OF REVERSE OGEE AND BEVEL MOLDING PLANES, both by D.R. Barton & Company, Rochester, New York. One is marked on the heel with the designation 3/8" and the other 4/8". Both bear the owner initials "W.J.B." They are in nearly new condition. 90 - 180
207. A SIX-DRAWER PATTERN MAKERS TOOL CHEST fashioned made from cherry wood. This nearly perfectly preserved chest has six ring-pull drawers as well as a pair of vertical side slots of unknown original intended function. and having unusual side slots. Fully 98% of the original finishes remain. 350 - 750
208. A classic PANEL SLITTING MARKING GAUGE by Allen and Eldridge, Williamstown, Massachusetts. This essentially unused tool has been boldly struck with the imprint of this rare Massachusetts maker. The Allen & Eldridge mark rates the "A" mark for rarity in American Wooden Planes, Fourth Edition, where it is speculated that their primary business may have been to produce planes for other makers. 150 - 300
209. An early WESTERN PENNSYLVANIA PINE BLANKET CHEST. This ca. 1820's chest is fitted together with rail & stile joints and ornamented on three sides by turned decorations on paneled boards. A most interesting piece of early American furniture. 200 - 400
210. An early BEECH ROUND MOLDING PLANE by Jo. Wilbur, Newport, Rhode Island. This plane has been boldly struck with the imprint of this scarce Ocean State maker. The Wilbur imprint rates three stars for rarenity in American Wooden Planes, Fourth Edition. 300 - 600
211. A rare "BEDROCK" SEVEN-INCH SMOOTHING PLANE, No. 602, by STANLEY havine a hard rubber "B. of E." handle. The cutting iron is marked with the ca. 1920's era "Sweetheart" trademark. Fully 90% of the original black japan finish remains on this clean and well preserved example. 300 - 600
212. A most interesting and unusual FOLDING DIVIDER FASHIONED FROM PLATE BRASS. When not in use, this device folds flat for transport and storage. When needed, it folds out to a three-legged stand holding a single, articulated pointer arm in the manner of a divider tip. The joints have decorated embossed brass covers and the device is in nearly new condition. We suspect, based on materials, high level of quality and design that this was intended for military use and likely used to assist in map reading and charting. 175 - 350
213. An ASTRAGAL AND COVE MOLDING PLANE by Jo. Fuller, Providence, Rhode Island. This early molder is crafted from Yellow Birch and has been boldly struck with the Fuller imprint. 125 - 250
214. A classic "ULTIMATUM" BRACE by William Marples and Sons, Hibernia Works, Sheffield, England. This superb example is marked with the Royal crest on the brass and retains its original IVORY ring in the head. 300 - 600
215. A "SWEETHEART" ERA CUTTING IRON, CHIP BREAKER AND LEVER CAP by STANLEY for a No. 1 size plane. The cutter is marked on both sides with the trademark. 250 - 500
216. A rare "TYPE 1" NO. 1 CUTTING IRON AND CHIP BREAKER by STANLEY. This chip breaker is marked with the 1867 patent date on this great "spare" which will make a "Type1" No. 1 plane complete and proper. 100 - 200
217. A TYPE STUDY OF NO. 1 PLANE CUTTING IRONS by STANLEY. Types 2 through 9, including all known trademark types, are included in this definitive set. In conjunction with lots 215 and 216 offered previously, they comprise the full range markings used on the Stanley No. 1. All are in top collector quality condition. An instant collection and a great resource for the collector or dealer. 300 - 600
218. A ONE-FOOT, FOUR-FOLD FOLDING RULE of IVORY and BRASS by H.J. Wood, 32 Oxford Street, London, England. This well preserved Nineteenth Century rule is marked with edge graduations and has bitted hinge joints in the center in the manner of early rules. A nice example. From the John Meneely Collection. 125 - 250
219. A TWO FOOT, FOUR-FOLD FOLDING RULE of IVORY and German silver by J. Rabone & Sons, Birmingham, England. This pristine rule has dual inside bevels and is engraved on the outside with advertising for "The Lion Foundry, Kirkintilloch". Kirkintilloch is eight miles to the Northeast of Glasgow, Scotland. A superb IVORY rule in top collector quality condition. 300 - 600
220. A NARROW TWO-FOOT, FOUR-FOLD FOLDING RULE of IVORY and German silver by Edward Preston & Sons, Birmingham, England. This early rule has bitted central hinge joints and only light, uniform yellow aging on the outside faces. It is tight, crisp and in top condition. From the John Meneely Collection. 250 - 500
221. A TWO-FOOT, FOUR-FOLD FOLDING RULE of IVORY and German silver. The inside faces are beveled in the manner of the classic architect's rule. This superb example has only some minor uniform light yellowing. A magnificently well preserved IVORY rule. From the John Meneely Collection. 300 - 600
222. A rare and nearly perfect TWO-FOOT, FOUR-FOLD CALIPER RULE of IVORY and German silver by Edward Preston & Sons, Birmingham, England. This uncommon extra long caliper rule is bright white, crisp, sharp and in nearly new condition. As good as they get. From the John Meneely Collection. 350 - 750
223. An EARLY BRASS PLUMB BOB having a "keeper" body that screws over the tip to allow storage without damage to the tool or anything that gets in the way of its point. This example is in top collector quality condition. 125 - 250
224. A "CHARLESTOWN." OVOID THREE-GALLON JUG reportedly produced by Frederick Carpenter, Charlestown, Massachusetts. This gray jug has had an ocher stain applied to the top and bottom and is in excellent condition, noting a small chip on the applied handle. 100 - 200
225. A showy and artfully crafted PRESENTATION GRADE BACK SAW having German silver fittings and an ivory handle. The German silver back is imprinted with English hallmarks. This unused tool looks to date from the Nineteenth Century and may have been produced for use as a presentation to a builder or architect. 1000 - 2000
226. An decoratively inlaid EBONY AND BRASS BENCH LEVEL by Buist, Edinburgh, Scotland. Ornamental brass plates are set into the body of this tool that makes it a functional work of art. A classic Scottish level in top collector quality condition. 150 - 300
227. An extremely rare "NO. 1" SIZE SMOOTHING PLANE, No. 98, by the Birmingham Plane Manufacturing Company, Birmingham, Connecticut. This 1 1/2" size cutting iron plane was patented December 16, 1884 by George D. Mosher of Birmingham, Connecticut. This complete and proper example has been nicely rejapanned and appears nearly new. This 6 7/16" length plane is featured with the five other examples of the "No. 1" size plane on Page 2 of Volume 2 of Roger Smith's "Patented and Transitional Planes in America". A copy of the reprinted Birmingham Plane Company catalogue is included with the plane. An excellent example of a rare and desirable "No. 1" size smoothing plane. 1000 - 2000
228. An early and very well preserved WOOD BODY SCRAPER PLANE by the Fox Manufacturing Company, Milwaukee, Wisconsin. This graphic and oversize scaper has a decal in the form of a fox on the side of the body of the tool. A rare special purpose woodworking tool in extra crisp and clean condition. 300 - 600
229. A ROSEWOOD HANDLE METALLIC PLOW PLANE. This complex craftsman made plane has four knurled locking screws to precisely lock the fence in position. The arms of the outside fence are joined together with a curved section of square stock bronze/copper alloy that is marked with the designation "Pat. Apl'd. for". A mechanically interesting plane in excellent collector quality condition. 200 - 400
230. An AUTOMATIC MICROMETER GAUGE, No. 5890, by Lewis Schopper, Leipzig, German. This elaborate oversize precision tool is also marked with the imprint of the Testing Machine Company of New York City. Fully 99% of the original finishes and decorations remain on this pristine example. 250 - 500
231. A MASSIVE DOUBLE IRON COMPLEX MOLDING PLANE by Reed, Utica, New York. This quirk ovolo filletster ogee is in nearly new condition. 350 - 750
232. An EARLY PATENT SMOOTHING PLANE as manufactured by Henry Foss, Pine Meadow, Connecticut under the specifications of the Foss Patent of September 3, 1878. This is a non-adjustable type has a replacement cutter by Stanley. 200 - 400
233. An UNHANDLED ROSEWOOD PLOW PLANE having rosewood arms and nuts by Way and Sherman, New York, New York . It is in top collector quality condition and clearly marked with the maker name and working location. From the Eric Olson Collection. 300 - 600
234. TWO EBONY AND BRASS MARKING GAUGES, both by William Marples and Sons, Sheffield, England. Included are an oval head type and another having a solid turned brass head. Both are in excellent condition. 120 - 240
235. A COACHMAKERS COCK BEAD MOLDING PLANE by Israel White, Philadelphia, Pennsylvania. This most unusual six-inch length plane is fully boxed with rosewood boxed with rosewood. 300 - 600
236. A SOLID BOXWOOD JOINTER PLANE having a Providence Tool Company cutting iron. This very nicely patinated plane is absent any checks or cracks in the boxwood. From the William Eviston Collection. 150 - 300
237. A TWO-FOOT, FOUR-FOLD FOLDING RULE, No. 32, by the Upson Nut Company, Unionville, Connecticut. This pristine half-bound boxwood rule is graduated in tenths of an inch and marked with architects scales on the inside. It is in essentially unused condition. From the James Doerflinger Collection. 100 - 200
238. TWO EXTRA CLEAN COMPLEX MOLDING PLANES, both by J. and J. Gibson, Albany, New York. Included are a quirk ovolo with astragal and a steep quirk ovolo with bevel. Both are in top collector quality condition. 150 - 300
239. A PAIR OF HANDLED COMPLEX MOLDING PLANES, both by E.W. Pennell, 225 Arch Street, Philadelphia, Pennsylvania. Both are lignum boxed and marked with the owner imprint "T. Megargee". 350 - 750
240. An early HIGHLY DETAILED CARVING OF AN AMERICAN EAGLE. This distinctive "fat body" eagle was at one time mounted on a piece of furniture or a clock as it has a four inch wide indented rectangular cut from the base and evidence of having been affixed to something else. It is in superb condition and very highly detailed on the body and feathers. The eagle has a most appealing wide and muscular body that brings it to life. A very nice thing. 200 - 400
241. An EARLY PATENT TONGUE MOLDING PLANE by the Multiform Molding Plane Company, patented August 29, 1854. This example of Worrall's Patent has a brass holder to retain the cutting iron that is tightened by means of a floral fixing screw at the rear of the plane. We are aware of only one other example of this plane bearing the floral screw. That plane is shown in Roger K. Smith's "Patented and Transitional Planes in America, Volume I" on Page 28, Plate 25. The plane could use a judicious cleaning, but it is complete, marked with the maker name and patent date and very, very rare. 1250 - 2500
242. An example of THE "EAGLE" CAST IRON BEVEL by Kershaw Brothers Mfrs., Cleveland, Ohio, patented February 9, 1892. This 12" blade example is marked with both the maker name and patent information. 60 - 120
243. An EARLY PATENT COMBINATION WRENCH by Louderback and Company, Philadelphia, Pennsylvania. This graphic gizmo incorporates the functions of a vise, punch, hammer, tack puller, shears, etc. into a single tool. It was patented on May 1, 1883 by Robert Erdman and William Phillips of Philadelphia, Pennsylvania. A nice example in top collector quality condition. 200 - 400
244. A TWO-FOOT, FOUR-FOLD FOLDING RULE of IVORY and German Silver, No. 85, by STANLEY. This clean and sound example has some light yellowing on the outside face, but is otherwise in perfect condition. A scarce Staley ivory rule. From the John Meneely Collection. 350 - 750
245. A TWO-FOOT, FOUR-FOLD FOLDING RULE of IVORY and German Silver, No. 86, by STANLEY. This magnificently well preserved example is crisp, tight and bright white in color. All of the edges are sharp and the rule is offered without condition or apology. Nice. From the John Meneely Collection. 600 - 1200
246. A TWO-FOOT, TWO-FOLD FOLDING ARCHITECT'S RULE of IVORY and German silver, No. 86 1/2, by STANLEY. This rare specialty rule with inside beveled edges is bright white, crisp and clean, noting some small scattered patches of yellow. All of the joints are tight and the edges sharp and crisp. The way ivory rules were when they left the factory. Extra nice. From the John Meneely Collection. 600 - 1200
247. A TWO-FOOT, TWO-FOLD FOLDING RULE, No. 87, by the Stanley Rule & Level Company, New Britain, Connecticut. This IVORY and German silver rule has light, uniform yellowing on the outside, but is otherwise crisp and perfect. The style of the lettering used for marking the Stanley name on the inside indicates that this rule is of very early manufacture. All of the edges are sharp and the joints nearly as tight as the day the rule was made. Nice. From the John Meneely Collection. 600 - 1200
248. A TWO-FOOT, FOUR-FOLD FOLDING RULE, No. 89, by STANLEY. This rare double arch joint rule of IVORY and German silver is in extra crisp condition, with only minor yellowing. The embellishments and graduations are dark and extra clear. A rare Stanley rule in top collector quality condition. From the John Meneely Collection. 600 - 1200
249. An extremely rare HALF-BOUND, ARCH JOINT FOLDING RULE, No. 95, crafted from IVORY and German Silver by STANLEY. This elusive "broad" form ivory rule is only the third of this number designation that we have ever offered for sale. The rule is crisp and bright white in color on both the outside and inside faces. The numbers and embellishment lines are crisp and black on both the outside and the inside. The finest example of this top-of-the-line Stanley IVORY rule that we have seen or offered for sale. Highly recommended. From the John Meneely Collection. 1500 - 3000
250. A TWO-FOOT, FOUR-FOLD FOLDING RULE, No. 97, by STANLEY. This, the "top of the line" Stanley IVORY rule is of the broad, double arch-joint configuration. This early example is marked with the Stanley name and number designation. It has aged to a uniform medium dark yellow, but all markings are clear and the ivory is absent any chips or cracks. An extremely rare example of Stanley very best ivory rule. From the John Meneely Collection. 1000 - 2000
251. An EIGHT DAY SHIP'S CHRONOMETER by the Waltham Watch Company, Waltham, Massachusetts. This example is in perfect condition in its original its original mahogany case with key. A superb nautical collectible in top collector quality condition. From the John Meneely Collection. 350 - 750
252. A solid brass EIGHTEEN-INCH ROLLING PARALLEL RULE by A. West & Partners, London S.W., England. This unused navigator's rule is in brand new condition in its original Mahogany ase. From the John Meneely Collection. 125 - 250
253. An early BRASS AND IVORY MONOCULAR by Lemiere Brev. Du Roi, Palais Royal No. 6, Paris, France. The eyepiece of this pocket telescope is embossed with the maker name. The optics are perfect and this precision Nineteenth Century instrument is in essentially new condition, noting one tight and abbreviated age check in the ivory. From the John Meneely Collection. 150 - 300
254. A GIMBELED BRONZE NAUTICAL COMPASS by the Kelvin & Wilfred O. White Company, Montreal, P.Q. This specialized nautical instrument is in top condition in its original Mahogany case. From the John Meneely Collection. 120 - 240
255. An IVORY DRAUGHTSMAN'S ROLLING PARALLEL RULE by Suffell, 132 Long Acre, London, England. This uncommon precision rule has multiple graduations on the face and is graduated on the fittings of the roller. A classic nautical rule in superb collector quality condition. 300 - 600
256. A MINIATURE ROUTER PLANE carved from solid IVORY and fitted with a wedge of Brazilian Rosewood wedge. A full brass sole adds contrast and visual appeal. From the John Meneely Collection. 300 - 600
257. A FULLY BOXED SASH AND MOVING FILLETSTER PLANE, No. 17, by Alex. Mathieson & Sons, Glasgow, Scotland. This well made plane has is fitted with two "nicker" irons on the body. It is in excellent collector quality condition. 200 - 400
258. A rare PROTOTYPE ADJUSTABLE METALLIC PLANE by Norris, London, England. This plane is fitted with a cutter adjustment in the pattern of London maker C. Nurse in a variation that has been observed on only a few other planes. It is believed that these planes were fitted out and sold by Nurse on a very limited basis as they worked at finding a cutter adjustment to compete with the popular Norris type. The mechanical limitations of the cutter, including the inability of the mechanism to raise the cutting iron, likely led to the termination of the experiment and to the rarity of this planes and others like it. A rare Norris plane in superb collector quality condition. 3000 - 6000
259. An example of RODIER'S PATENT SMOOTHING PLANE by the Laflin Manufacturing Company, Westfield, Massachusetts. This distinctive plane, which was patented on March 4, 1879, has a "corrugated" pattern to the casting on the sides of the plane and an undulating corrugation pattern to the sole. This complete and original example retains some 70% of its original black japan finish and is mechanically perfect in all respects. 1500 - 3000
260. An early CARVED FRENCH SMOOTHING PLANE. This artfully executed wide body plane has dual side handles in the rear of the plane and a rope pull handle in the front. It is decorated with incised floral carving on the top at both the front and rear of the plane. The cutting iron is embossed with a decorative logo and the initials "V.P." This most unusually configured plane has a most appealing shiny golden patina. 350 - 750
261. An EARLY PENNSYLVANIA MAKER "GOOSEWING" AXE by J. Weber. This classic axe has been double struck with the distinctive maker mark used by this uncommon Southeastern Pennsylvania maker. It has a most appealing smooth, uniform dark brown patina and retains an early, offset oak handle. 300 - 600
262. A ROSEWOOD SLITTER MARKING GAUGE by Thomas Rice, Boston, Massachusetts, patented September 9, 1873. This showy special purpose woodworking tool is in clean and sound condition. 150 - 300
263. A MASSIVE MILLWRIGHTS PLUMB BOB having a reversible tip. This early layout tool has a most appealing dark golden patina. 200 - 400
264. An extra early BOXWOOD FOUR-SIDE SLIDE RULE. This Eighteenth Century pattern rule is marked with all manner of scales and tables. One of my recurring nightmares is being in an airplane seat on a West Coast flight next to someone intent on explaining all of the various scales and tables to me in great detail. It is enough for a gentleman to have attended physics class in college and mastery is of no consequence. A superb example of an extremely early pattern of slide rule. 125 - 250
265. A LIGNUM BOXED OGEE MOLDING PLANE by L. Little, Boston, Massachusetts. This early plane has an extra bold imprint and wide flat chamfers. 125 - 250
266. An early COVE AND ASTRAGAL MOLDING PLANE by M. Martien, Philadelphia, Pennsylvania. Martien worked ca. 1799 to 1809 only. This plane is marked with his "A1" designated imprint, which rates four stars for rarity in American Wooden Planes, Fourth Edition. 150 - 300
267. A PATTERNMAKERS CORE BOX PLANE, No. 57, by STANLEY. Nearly all of the original shiny nickel plating remains on this clean example which is complete with the proper and includes often-missing "turnbuckle" fitting. A very nice example of an under appreciated Stanley special purpose plane. 350 - 750
268. An unusual DOUBLE COACH MAKERS ROUTER. This innovative tool has grooving cutters on both the top and bottom, allowing the user to reverse and flip over the tool and use it on either side of the work or choose which side to use based on the orientation of the work. It is in top collector quality condition. 125 - 250
269. A TWENTY-SIX INCH LENGTH SHIP RABBET MOLDING PLANE by L.S. Soule, Waldoboro, Maine. There is a tight crack in the wedge, but this classic maker-marked shipwright's plane is otherwise in excellent condition and boldly struck with the distinctive Soule imprint. 100 - 200
270. An UNHANDLED BOXWOOD PLOW PLANE having boxwood arms and nuts by J. Denison. This extra clean plane has a most appealing smooth, dark golden patina. 200 - 400
271. An ONE-FOOT, FOUR-FOLD CALIPER FOLDING RULE of ivory and German silver, No. 53 B, by E.A. Stearns & Company. This magnificent Stearns rule, which is clearly marked with the maker name and product number, remains today in essentially the same condition as it would have been had it been pulled from beneath an imaginary hardware counter in an imaginary store by an imaginary clerk some 125 years ago. An exceptionally nice ivory rule in essentially new condition. Highly recommended. From the John Meneely Collection. 800 - 1600
272. An extremely rare and very near perfectly preserved example of the STEPHENS PATENT INCLINOMETER RULE, No. 38, fashioned from IVORY and German silver. This rule, which is an example of the January 12, 1858 patent issued to L.C. Stephens, features a two-fold rule with an integral level and extension arm to allow it to function as an inclinometer, bevel or square. We are aware of less than ten examples of this rule, each in varying states of degradation from the original condition. This well preserved example has aged to a medum yellow color and has only one age check in the ivory. All of the graduations, maker mark and product number are clear and readable. Some dark stains are visible on the steel extension are, but the rule is otherwise excellent. An extremely rare "top of the line" rule from the earliest days of American rule making. From the John Meneely Collection. 2500 - 5000
273. A ONE-FOOT, FOUR FOLD FOLDING RULE, No. 99 3/4, by the Chapin-Stephens Company, Pine Meadow, Connecticut. In his introduction chapters to Boxwood & Ivory: Stanley Traditional Rules, 1855-1975, author Phil Stanley provides a narrative history of the principal rule makers of the United States and recounts the manufacturing process for both boxwood and ivory rules. Based on his collecting experience, Stanley suggests that the wide range of ivory rules offered by the principal makers between the 1850's and the beginning of the First World War would have been designed almost exclusively for presentation purposes, rather than actual utility. He points out the well known propensity of ivory to shrink and yellow over time, both qualities which would preclude any utilitarian function. The rule offered here, an unprecedented example of a presentation rule in its original presentation box, as prepared by the factory lends additional credence to Stanley's theory. The name "F. W. Duennebier" is written in ink on the outside of the ivory-colored pasteboard box with gilt edges. The inside of the No. 99 3/4 ivory & german silver 1 foot, four-fold rule is also inscribed on the ivory face with the F.W. Duennebier name in carefully engraved block letters and filled with blacking in a way that could only have been accomplished in the Chapin-Stephens factory. The rule itself, a No. 99 3/4" caliper rule, is rare in its own right. The condition is as-new: the joints are tight, the ivory is bright white and all lacquer finishes remain on the german silver binding and joints. An extraordinary collectible rule in top collector quality condition. Magnificent. From the John Meneely Collection. 1250 - 2500
274. An uncommon "TYPE 1" GAGE JACK PLANE, No. 5, by STANLEY. The body of the plane is marked with the designaton "Pat. Appl'd for" and the number 5, rather than G 5, as on later models, is cast in the bed. Approximately 90% of the original black japan finish remains on this clean example. 80 - 160
275. A "BEDROCK" "JUNIOR JACK" PLANE, No. 605 1/4, by STANLEY. This extra rare "Bedrock" plane is in excellent condition and retains 98% of its original black Japan finish. The cutting iron is imprinted with the "Sweetheart" trademark. 400 - 800
276. A NICKEL PLATED STEEL INCLINOMETER LEVEL by the Acme Level Company, Toledo, Ohio. Fully 95% of the original finishes remain on this example that is in nearly new condition. Finish seems to have little affinity for these pressed steel levels. This example is as close to factory new as any we have ever seen. 80 - 160
277. TWO EARLY ELECTRIC MOTORS including one "Toy" type and one having a cast brass top plate marked with the designation "Porter Motor K. & D. No. 4". 125 - 250
278. An EARLY TYPE ELECTRIC MOTOR, No. 2, by the Leavitt Motor Company, Providence, Rhode Island. This classic early Twentieth Century motor has a cast brass top plate and is in excellent overall condition. 125 - 250
279. A TWO-FOOT, SIX-FOLD FULLY BRASS BOUND FOLDING RULE, No. 58 1/2, by STANLEY. This arch joint rule is not marked with the Stanley name, but it has the "pentagonal pin" that is characteristic of Stanley manufacture. A rare Stanley rule in excellent collector quality condition. One of the rarest of all Stanley boxwood rules. 300 - 600
280. A TIGER STRIPE MAPLE RAZEE JACK PLANE having a burl handle and strike and a wedge formed from birdseye maple. It is marked with the owner imprint "W. Mead". A pretty plane that has only a longitudinal age check in the body to note as an apology. 100 - 200
281. A patent DRAWING and DESIGN TEMPLATE by the Polygraph Company of Philadelphia, Pennsylvania. This device, which was patented December 8, 1885, is in new condition in its original pasteboard box with instruction paper. 200 - 400
282. THREE EXTRA CLEAN "KEEN KUTTER" TOOLS, all by the E.C. Simmons Hardware Company, St. Louis, Missouri. Included are a carpenter's hatchet and No. 92 and 94 nickel plated spoke shaves. Both spoke shaves retain more than 90% of their original nickel plating. 80 - 160
283. A HANDLED APPLEWOOD PLOW PLANE having boxwood arms and nuts, No. 239 1/2, by H. Chapin, Union Factory. It is in nearly new condition. From the David Brandt Collection. 175 - 350
284. A HANDLED BOXWOOD PLOW PLANE having boxwood arms and nuts by Deforest, Birmingham, Connecticut. This very nicely patinated plane is in excellent condition, noting some triming to the horn of the tote. From the Eric Olson Collection. 225 - 450
285. A rare PHILADELPHIA MAKER MOLDING PLANE by John Richards, Philadelphia, Pennsylvania. Richards is documented as having worked ca. 1809 only. This plane is marked with his "A1" designated imprint, which rates four stars for rarity in American Wooden Planes, Fourth Edition. 200 - 400
286. An unusually narrow ENGLISH ARCHITECTS FOLDING RULE of IVORY and German silver having inside bevels and graduated on the sides of the rule. It is in exceptionally well preserved condition, clean and bright white. 200 - 400
287. An EWING'S PATENT INCLINOMETER LEVEL by Alvan B. An example of EWING'S PATENT PENDULUM INCLINOMETER LEVEL as patented and produced by Alvan B. Ewing, Lewisburg, Tennessee in accordance with the specifications of a United States Patent issued on March 19, 1889. This gravity type mechanism level is in top collector quality condition and clearly marked with the patent date. 250 - 500
288. TWO SPECIAL PURPOSE WOODWORKING TOOLS, both by Samuel Auxer, Lancaster, Pennsylvania. Included are a violin makers clamp and a beech slitting gauge. This is the first clamp bearing the Auxer imprint that we have offered for sale. Rare. 100 - 200
289. A SEVEN-INCH LENGTH CAST IRON INCLINOMETER LEVEL by the Davis Level and Tool Company, Springfield, Massachusetts. Fully 95% of the original black japan finish remains on this extra crisp and clean example, which is marked with the Davis Patent date of September 17, 1867. 300 - 600
290. A rare "INFANT" BLOCK PLANE, No. 0 as patented by Henry Foss and Philip Chapin and produced by Henry Foss of Pine Meadow, Connecticut. This uncommon small size plane has a distinctive dimpled cap iron and in is in excellent collector quality condition. 250 - 500
291. An unusual BRASS FINISHED LEVEL by A.E. Young, Boston, Massachusetts. This most unusual level has decorative circular patterns filed into the brass end plates. Simply a great early level. 300 - 600
292. A DIMINUTIVE CUBAN MAHOGANY SPIRIT LEVEL by L.B. Watts, Maker. The top plate of this sixteen-inch level is marked with Watts' distinctive bold eagle imprint. A great early level in nearly new condition. 100 - 200
293. FOUR EXTRA CLEAN MARKING GAUGES, all by STANLEY. Included are a No. 71 double mortise; a No. 72 double mortise; a No. 74 double mortise; and a No. 73 slide mortise type. All are in top collector quality condition. 125 - 250
294. A classic PANEL RAISING PLANE by M. Copeland, Warranted. The plane is also marked with the imprint of Pittsburg hardware dealers Logan and Kennedy. It is in nearly new condition. 150 - 300
295. A YELLOW BIRCH FLUTING MOLDING PLANE by S. Dean (Dedham, Massachusetts). This plane is complete and original and marked with the "B" designated imprint shown in American Wooden Planes, Fourth Edition. It rates three stars for rarity. 300 - 600
296. THREE EXTRA CLEAN COMPLEX MOLDING PLANES including an H. Tileston quirk ovolo astragal; an S. and H Hills quirk ovolo with square; and an H. Tileston quirk round. All are in top collector quality condition. From the Donald Nesslage Collection. 150 - 300
297. An early FIXED SASH MOLDING PLANE by G. Hawes, Wrentham, Massachusetts. This plane has been boldly struck with the imprint of this obscure maker from the Birthplace of American Planemaking. There are some stains on the side, but the plane is otherwise in excellent condition. Travelers in the area of Southeastern Massachusetts will be interested to hear that the Township of Wrentham recently erected, using stimulus funding from the American Recovery and Reinvestment Act, a sign at the edge ot town that proclaims: "Wrentham, Massachusetts/We are not Interested in Wooden Planemakers/Please Do Not Bother Us". Another of those facts that you can find here, and only here. 800 - 1600
298. A STEPPED SET OF TEN BEAD MOLDING PLANES, all by John Moseley and Sons, London, England. All have skew set cutting iron and are in excellent working condition, noting that one has a replaced wedge. 200 - 400
299. A MINIATURE MAHOGANY WORK BENCH fitted with a cast bronze quick adjust vise. The highly detailed vise is fully functional, having a quick adjust mechanism. A superb miniature in top collector quality condition. 250 - 500
300. An example of the SEYMOUR BOSTWICK PATENT DRILL AND BRACE as produced by Q.S. Backus, Chambers Street, New York. This early patent brace retains its a full paper original paper label on the inside of the drill gear wheel. The Bostwick Patent was issued on March 23, 1880 and is marked on the paper label. The chuck is also marked with the dates of several of the Quimby Backus patents. This is the first example of this combination tool that we have offered for sale. It is in brand new condition, despite its one hundred and thirty years of existence. Highly recommended. 600 - 1200
301. A "VICTOR" COMPASS PLANE, No. 20, by STANLEY. Fully 98% of the original black japan finish remains on this exceptionallycrisp and clean example. 150 - 300
302. A HOLLOW HANDLE TOOL HANDLE, No. 11, by the Goodell-Pratt Company, Greenfield, Massachusetts. This example is complete with ten original tempered tools in new condition in its original box. 100 - 200
303. TWO HIGH QUALITY HOROLOGICAL TOOLS BOOKS by Theodore R. Crom. Included are "Horological and Other Shop Tools" and "Horological Shop Tools". Only 150 copies of each of these books were originally printed. Both are signed by the author. 300 - 600
304. A FENCED CHAMFER PLANE by Edward Preston and Sons. This high quality plane is in superb condition and has developed a bright golden patina. 120 - 240
305. A rare LEFT-HAND BEAD MOLDING PLANE by T. Goldsmith, Philadelphia, Pennsylvania. The sole is fitted with "interrupted" boxing. It is also marked with the owner imprint "C. Delaney". 100 - 200
306. A rare SURGEON'S TREPANNING BRACE by STANLEY. These were produced during the First World War by Stanly for military use. It is marked with the designation "Medical Dept. U.S.A." as well as the Stanley ca. 1915 "Type 11" trademark. 200 - 400
307. A 5 1/2" SMOOTHING PLANE, No. 1, by STANLEY. It is marked with Stanley's ca. 1915 "Type 11" trademark. There are chips from side of tote, but the plane is otherwise complete and excellent. 600 - 1200
308. A SOLID MACASSAR EBONY PLOW PLANE by L. Deforest, Birmingham, Connecticut. This plane has some thread damage, but is otherwise excellent. A pretty plow by a highly respected maker. 600 - 1200
309. A SEVEN-INCH SMOOTHING PLANE, No. 2, by STANLEY the cutting iron is marked with the ca. 1930's "notched rectangle" trademark. This pristine example is in new condition in its original box. 500 - 1000
310. An UNHANDLED BOXWOOD PLOW PLANE having boxwood arms and nuts by J. Killam, Glastenbury, Connecticut. This extra clean plow It is in nearly new condition. From the Donald Nesslage Collection. 250 - 500
311. A SEVENTEENTH CENTURY TYPE EUROPEAN SAW. This early hand forged saw is fitted with an shapely applewood handle that appears orgiginal to the tool. 200 - 400
312. A LIGHT DUTY PLOW PLANE, No. 50, by STANLEY. This rosewood handle example is in new condition in its original pasteboard box with all original cutters and accessories. 175 - 350
313. A rare PLANE MAKER'S "MOTHER" PLANE by A. Inglis, Delhi, New York. This plane cuts the shape for an astragal molding. It is in superb condition. A genuine planemaker's tool marked with the maker's imprint. 300 - 600
314. A SET OF SIX COACH MAKERS BRONZE PLANES, all by Geral. All have ebony wedges and mahogany handles. 200 - 400
315. A "RAZOR EDGE" SPOKE SHAVE, No. 85, by STANLEY. This, the narrower of Stanley's two "Razor Edge" boxwood shaves, is marked with the ca. 1920's era "Sweetheart" trademark. 100 - 200
316. A classic HAND CARVED CROOKED KNIFE having a star and arrow pattern. This unusual large size example appears to have been fashioned from the tip of an old bayonet. This is one step less than forging swords into plowshares, but makes for an interesting tool. 125 - 250
317. THREE GUN RELATED ITEMS including a gunsmith's double screwdriver, copper powder flask and a bag of wind tower shot. 100 - 200
318. A SIX-PANEL OAK CARPENTERS TOOL CHEST having multiple draws and retaining nearly all of its original finish. This pretty chest could pass muster as a piece of furniture while holding a stash of great tools. 300 - 600
319. A HANDLED LIGNUM SMOOTHING PLANE by J. Bradford, Portland, Maine. It is marked on the rosewood wedge and with the maker name. It is in excellent condition, noting a tight crack in the handle. From the David Brandt Collection. 300 - 600
320. TWO EXTRA CLEAN MOLDING PLANES, both by F. Dallicker, Douglas, Pennsylvania. Included are a double washboard plane and a cove marked with the owner mark "Jacob H. Erb". 150 - 300
321. A rare "B" PLANE No. 2 size plane, No. 2, by the Birmingham Plane Manufacturing Company, Birmingham, Connecticut. This ca. 1890's "No. 2" was produced by Birmingham using the recently-expired Leonard Bailey patent mechanisms to compete directly with Stanley. The black japan finish has been slightly "enhanced" by a previous owner and the plane is in excellent overall condition. A nice example of a rare "No. 2" size plane. 250 - 500
322. THREE EARLY BOSTON MAKER LEVELS including an A.E. Young 26" length example in mahogany; a Mulliken & Stackpole 26" length rosewood level; and a Lambert, Mulliken & Stackpole Cuban Mahogany level that measures 28" in length. 125 - 250
323. A PAIR OF CUSTOMS CROSS CALIPERS by Dring and Fage, London, England. The body of these boxood calipers are marked with the designation "H.M. Customs & Excise". A pair of brass cross braces in the corner are original to tool and this may be a heavier duty version of these calipers than those normally encountered. 100 - 200
324. An extremely rare Makers of Surveyor's Instruments book by Charles E. Smart. This FIRST EDITION copy is in nearly new condition. A privately published book, this is the only comprehensive reference to the Makers of American surveying instruments and was compiled by Mr. Smart when he was president of W. & L.E. Gurley, the instrument makers from Troy, New York. The book has been out of print for many years and is unlikely to be reprinted. 200 - 400
325. An early PATENT CAST IRON INCLINOMETER LEVEL as patented by Patrick Clifford of Holyoke, Massachusetts, on November 26, 1867. n indexed dial allows the level to be set at precise angles on this early and innovative precision tool. The patent date is marked on the brass facing of the level vial. A rare and very well preserved patented American level in excellent collector quality condition. 800 - 1600
326. A "NO. 2" SIZE METALLIC PLANE, No. M 2, by H.C. Marsh & Company, Rockford, Illinois. The cutting iron is not marked on this example, which is otherwise complete and excellent, noting initials etched in the handle. An uncommon "No. 2" size plane in excellent collector quality condition. 200 - 400
327. An example of the PETTIT'S PATENT LAYOUT TOOL as produced by the R.R.R. Company, Marietta, Ohio, patented March 11, 1902. Some 85% of the original nickel plating remains on this uncommon precision layout tool. This is the first example of this device that we have seen or offered for sale. 175 - 350
328. A rare FIVE-INCH WIDTH BLADE LEATHER SKIVER by C.S. Osborne and Company, Newark, New Jersey. Fully 95% of of the original paint and factory lettering remains on this pristine, factory new example. 200 - 400
329. A ROSEWOOD INFILL SHOULDER PLANE by Buck and Company, 231 Whitechapel Road, London, England. This 3/4" width iron plane has an extra tight throat and could be put directly to use. 175 - 350
330. An early LAYOUT TOOLS OPPORTUNITY LOT including try squares, a traveler, a divider and a panel marking gauge having a bone plate inlaid in the head. 90 - 180
331. A SOLID ROSEWOOD FRET SAW of the "Sorrento" type. This prominently grained saw is in top collector quality condition. 100 - 200
332. A classic FORGED IRON THATCHER'S NEEDLE. These specialized tools were used in preparing bundles of thatch for roofing--a practice that remains in certain parts of England. This example has some minor pitting, but is otherwise in clean and sound condition. An uncommon tool and a sure conversation starter. 100 - 200
333. FOUR AMERICAN MADE POCKET WATCHES including two by Hamilton; an example by Waltham having gold hands and another by Waltham. All are in excellent collector quality condition. 125 - 250
334. An EARLY PATENT WOOD WORKING VISE CLAMP as patented and produced by Thomas Elwood Moon of Sabina, Ohio in accordance with the specifications of the Moon Patent of July 22, 1890. A spring-locking cam is designed to grip the wood and hold it in place, while allowing it to be easiliy removed by pushing in the opposite direction. 100 - 200
335. A classic CABINET MAKERS WORK BENCH by R. Bliss, Pawtucket, Rhode Island. Bliss is known as the patentee of a wooden screw clamp. This bench was obviously an attempt to expand the uses for wooden screws. It is fitted with both head and tail vises and is in excellent working condition. The bench is marked on the end of the head vise. 600 - 1200
336. A YELLOW BIRCH HOLLOW MOLDING PLANE by I. Comins, Charlton, Massachusetts. The name of this ca. 1800 Massachusetts maker has been boldly struck on this well preserved plane that has wide, flat chamfers and a short nine-inch body in the manner of Central Massachusetts makers. 300 - 600
337. A SUPERB MINIATURE VERSION OF THE STANLEY NO. 44 MILLER PATENT PLOW, RABBET AND DADO PLANE as produced by noted miniaturist Paul Hamler. Absolutely identical in all respects, down to the last screw and stop, to the original plane, this tool is fashioned from cast bronze and is in brand new condition. A great little plane. 250 - 500
338. A SUPERB MINIATURE VERSION OF THE STANLEY NO. 45 COMBINATION, RABBET AND DADO PLANE as crafted by master miniaturist Paul Hamler. This version of the first nickel-plated No. 45 features the elaborate vine decoration on the body. It is identical in all respects to the original including working adjustment screws and a rosewood handle. A great miniature in absolutely perfect condition. 150 - 300
339. An early SPECIAL PURPOSE IVORY FOLDING RULE marked graduated on one side with inches and marked with the designations "H|Q" and "H|H" on the other. The original intended function of the rule, which is in top collector quality condition, is not known. From the John Meneely Collection. 100 - 200
340. An early QUARTER ROUND MOLDING PLANE by C. Lower having double interrupted boxing. This early plane has wide flat chamfers and is clearly marked with the imprint of this undocumented planemaker. The mark has been assigned the "UR" rating in American Wooden Planes, Fourth Edition. This is the example reported in the book. 125 - 250
341. A CLARK'S BEST QUALITY SCREWDRIVER by R.H. Brown and Company, Westville, Connecticut. It is in a fitted box and in nearly new condition. 200 - 400
342. A CAST IRON MACHINISTS LEVEL having an integral plumb vial. This very well made Nineteenth Century level has been protected throughout its life by a purpose-made mahogany case. 100 - 200
343. A German COACHMAKER'S ROUTER PLANE by T.H. Bernhard, Frankfurt, Germany. This applewood body special purpose plane is in excellent collector quality condition. 350 - 750
344. A CAST IRON INCLINOMETER LEVEL by the Davis Level and Tool Company, Springfield, Massachusetts, patented September 17, 1867. Fully 85% of the original black japan finish remains on this extra clean example that is absent the chips and cracks that were the Achilles Heel of these levels. From the John Meneely Collection. 350 - 750
345. An example of BRODHEAD'S PATENT MARKING GAUGE as produced by the Star Tool Company in accordance with the Brodhead Patent of April 21, 1868. This rosewood cam-lock gauge is in brand new, unused condition. A superb example. 125 - 250
346. An extremely rare example of MAYO'S PATENT COMBINATION PLANE as produced by Babson & Repplier, Boston, Massachusetts under the Mayo Patent of January 1, 1872. Fully 85% of the original orange-gold finish remains on this extra clean example. The original rosewood handle had a sheared tote, which has been masterfully reproduced by Master Restorationist Jim Leamy of East Earl, Pennsylvania . A superb example of a graphic Nineteenth Century patented combination plane having a handle that is better than new. 2500 - 5000
347. An early DENTAL TOOTH "KEY" having a turned handkle forged from Cape Buffalo horn. These devices were used to grasp a tooth, apply leverage against the jaw and remove the tooth from its socket. We know of no reenactment groups engaged in reliving the Wonderful World of Nineteenth Century Dentistry. A great early dental tool. 100 - 200
348. A rare 24" BAILEY TYPE JOINTER PLANE, No. 8, by the Upson Nut Company, Unionville, Connecticut. This uncommon early cast iron plane would have been one of the first produced by competitors following the expiration of the Bailey Patents. Shortly after this plane was produced, the factory of the Upson Nut Company was destroyed in a devastating fire. A rare Nineteenth Century plane. 80 - 160
349. A CAST IRON VISE having a decal marked "Warren". This tool includes a printed tag that notes "From Stanley Model Shop". It is also marked "Return to Dept. 58 Stanley Tools" and a hand written notation "Rec'd by E.A.S. 1925" We assume that E.A.S. is prolific Stanley inventor Edmund A. Schade. A piece of history. 250 - 500
350. An EXTRA EARLY TYPE "SPLIT FRAME" SMOOTHING PLANE by Leonard Bailey and Company, Boston, Massachusetts. This early model is somewhat more crudely crafted than the later offerings, but is identical in all respects, having a spring set under the front knob and a steel adjustment screw directly behind the knob. It retains its full "W. Butcher cutting iron and is fitted with beech handles. A nice example of the inordinate complexity of the earliest attempts to craft a working cast iron woodworking plane. 2000 - 4000
351. A PRECISION POCKET NAUTICAL SEXTANT. This unmarked pocket-size instrument includes a screw-in telescopic sight and a pop-up lens to precisely measure the angle of the protractor gauge along the top. An identical device was reportedly issued a provisional British Patent in 1859 by Henry Swaisland (No. 452 of 1859). The instrument is in brand new, unused condition, but the leather case has seen some wear and is missing its cover. 250 - 500
352. An extremely rare SIX STEM MARKING GAUGE patented by Oden Brown and Thomas Berry of Capron, Illinois on July 7, 1868. According to Milt Bacheller's "American Marking Gauges", the Brown and Berry gauge is "extremely rare, unique and much sought after by collectors." In attempting to create a gauge of multiple shafts each of which could be independently adjusted, the inventors created a five-headed monster that is on many collectors' list of the top ten tools of all time. Marked with both the patent date and the maker name, and unmistakable, this example is missing three of the brass wear buttons on the face of the gauge but is otherwise complete and sound. One of the least common of all marking gauges. 350 - 750
353. A HANDLED BEECH PLOW PLANE by E.P. Nutting, South Amherst, Massachusetts having boxwood arms and nuts. The Nutting imprint rates three stars for rarity in American Wooden Planes, Fourth Edition. This plow is in clean and sound condition and boldly struck with the Nutting imprint. From the Donald Nesslage Collection. 200 - 400
354. THREE ENGLISH REED MOLDING PLANES including double, triple and quadruple types. Included are a William Moss double reed; an I. Lund triple reed; and an E. Knight quadruple reed. All are in excellent working condition. From the Carl Bostrom Collection. 80 - 160
355. TWO EXTRA COMPLEX MOLDING PLANES including a quirk ovolo with bead by Burton and a quirk ovolo with astragal by Candadian maker Wallace. Both are in top collector quality condition. 125 - 250
356. A MACHINISTS AND METAL WORKER'S CATALOGUE by William P. Walters and Sons, Philadelphia, Pennsylvania. This flexible cloth cover Edition is dated "1883". A wide range of engravings of innovative machinists tools, some of which we have never seen illustrated before, are included in this great Nineteenth Century catalogue. Highly recommended. 200 - 400
357. An example of EDDY'S PATENT SAW SET as patented by George W. Eddy of Bristol, Connecticut on June 20, 1893. This high gizmocity device has three separate fixing screws to regulate the precise setting of saw teeth. It has been given the "NS" rating, for "No Examples Seen" in the Friberg book on Patented American Saw Sets". 200 - 400
358. A FANCY CAST IRON BENCH PLANE having banded rosewood infill. The plane was discovered this summer in Northern Maine. The cutting iron is by the Ohio Tool Company. 200 - 400
359. An ARTFULLY CRAFTED CARPENTERS SLICK having a hand forged iron handle of sculptural form. The tool has a most appealing smooth, dark patina. 200 - 400
360. An EARLY MAHOGANY SIGHTING LEVEL by Alex. Mathieson & Sons, Glasgow, Scotland. A pair of "wine stem" pattern brass plates are inlaid in the level adjacent to the main vial. The sighting mechanism is in excellent working condition. The Mathieson imprint on the top plate appears to date from the earliest period of manufacturing by this prominent Scottish toolmaker. 300 - 600
361. An example of the TOWER'S PATENT FLUTE HANDLE SCREWDRIVER as produced by Tower and Lyon, New York, New York, patented May 15, 1877. It is in its original wooden box. 600 - 1200
362. An UNHANDLED BEECH PLOW PLANE by E.W. Carpenter, Lancaster, Pennsylvania. This classic Carpenter plow has a solid boxwood wedge and is in top collector quality condition. It is marked with the owner imprint of one "J.P. Taylor". Taylor reportedly worked as a cabinet maker in the Nineteenth Century. 750 - 1500
363. A rare EARLY PITTSBURG PANEL RAISING PLANE by W. Lithgow, Pittsburgh, Pennsylvania. Captain Walter Lithgow served in the War of 1812. and died shortly after returning home in 1813. His estate included a quantity of "..finished and unfinished planes...", effective proof that Lithgow produced planes commercially. He is reported in Pittsburg as early as 1807, making him one of the earliest of the Western Pennsylvania makers. 500 - 1000
364. An extremely rare SCREW ARM SASH FILLETSTER PLANE having birch arms and nuts by Israel White, Philadelphia, Pennsylvania. It is marked with the owner imprint "H. Homiller". This little used plane is in nearly new condition. 500 - 1000
365. A rare DOUBLE SNIPE BILL MOLDING PLANE by Mackay, Burley and Heys, Glasgow, Scotland. This fully sole boxed plane is in excellent condition, noting one chip from the boxwood sole. 150 - 300
366. A SKEW IRON TABLE JOINT MOLDING PLANE by E. Newell, Lanesboro, Massachusetts. This spectacular plane has an extra bold imprint and an artfully crafted escapement. Captain Ebeneezer Newell served in the American Revolution and died in 1810. 1000 - 2000
367. THREE EARLY SPIRIT LEVELS including two by J. & H.M. Pool and one by H.M. Pool. All have the distinctive eagle imprints and double level vials used by these important makers. All are in excellent collector quality condition. 125 - 250
368. A EIGHTEENTH CENTURY HANDLED HOLLOWING PLANE by I.W. (John Walton). It is also marked with the designation "J + C" on the toe. An ink mark on the heel of the plane, "31/6" is likely the original price marking. 600 - 1200
369. A CLASSIC NINETEENTH CENTURY MACHINISTS TOOL BOX of mahogany construction. This well preserved chest has three pull out drawers and a tray inside the lift top. It is in excellent condition and could be put directly to use. 200 - 400
370. A rare BRASS STRAPPED ROSEWOOD LEVEL, No. 12, by STANLEY. These levels were reportedly produced by Stanley after their acquisition of the works of Hall & Knapp. The brass strapping and vial cover plates are affixed with a total of fifty-six fixing screws. Only a handful of examples of this early level are known to exist. Rare. 1000 - 2000
371. An early PATENT MORTISE CUTTER as patented and produced by James and Rufus Matthews, Minneapolis, Minnesota in accordance with the specifications of their March 6, 1888 United States Patent. It retains its original turned cherry handle and is in nearly new condition. The first example of this tool that we have seen or offered for sale. 100 - 200
372. A PATENT INCLINOMETER LEVEL by the Bradford Union Manufacturing Company, Bradford, Pennsylvania. This uncommon level features a circular pattern pendulum type vial with the inclinometer graduations engraved on the ring around the center vial opening. Unlike previous examples of this level that we have observed, this tool has an open circle brass indicator dial to precisely identify the angle of inclination. An uncommon inclinometer level in excellent collector quality condition. 800 - 1600
373. A PATENT LIGHT DUTY PLOW PLANE, No. 14, by Leonard Bailey & Company, Hartford, Connecticut. This "Victor" series plane was produced under the specifications of the July 6, 1875 patent issued Charles G. Miller and Leonard Bailey. There is a small chip from the body near the arm, but the plane is otherwise in excellent condition, noting that one of the cutter fixing screws differs from those shown in product illustrations. 900 - 1800
374. A "RUGER" TYPE RATCHET BRACE by the Seymour Smith, Manufacturing Company, Oakville, Connecticut. This precision ratcheting brace is marked with the designation "Pat. Appl'd for". It employs a sliding lever to reverse the direction of the ratchet mechanism. The ratchet is so precise that it has a click-stop manner of working that is finer than any brace we have encountered. It is in top collector quality condition. 35 - 75
375. A rare and nearly perfectly preserved BOXWOOD CENTERWHEEL PLOW PLANE No. 140 by the Sandusky Tool Company, Sandusky, Ohio. This well preserved example retains much of its original finish on both wood and metal. The adjustment mechanism is smooth and flawless and the plane has only some minor stains to note as apologies. The prohibitively expensive cost of these planes when they were being produced made it much more likely that a woodworker who had made the decision to invest would not endeavor to save the minimal difference between the cost of the ivory tipped version and this version that was not so appointed. These planes have long been on the top of many collectors want lists. Opportunity knocks. 3000 - 6000
376. An extremely early DADO MOLDING PLANE by I. WALTON, IN READING. This extra long eleven and one-half inch plane is crafted from applewood and has been boldly struck on the toe with the distinctive Walton imprint. The forged iron depth stop is identical to that found on other Walton planes. The sole has been slightly rounded and the nicker iron is a later replacement. 1000 - 2000
377. A "BEDROCK" HEAVY SMOOTHING PLANE, No. 604 1/2, by STANLEY. The cutting iron is marked with the ca. 1920's era "Sweetheart" trademark. Fully 99% of the original black japan finish remains on this exceptionally clean example, which retains most of its original Stanley decal. 250 - 500
378. A PATENT DOUBLE BEAM MARKING GAUGE as patented by William McCullough, New York, New York on January 2, 1883. This gauge is noted as rare in the Bacheller book on Patented and Manufactured American Marking Gauges. This is the only example of this gauge that we have seen or offered for sale. Rare. 125 - 250
379. A PRIMITIVE BELT DRIVE APPLE PARER that retains its early red paint. It is hand crafted from pine and ash and has pegged mortise joints. A classic American household tool that has a most appealing patina from years of careful use. 200 - 400
380. A TAINTER FRAMING TOOL COMBINATION SQUARE as patented by Charles Taintor, Elizabeth, New Jersey. This woodworking layout tool is marked with the patent date of May 10, 1910. It is in top collector quality condition. 200 - 400
381. A No. "2" SIZE SMOOTHING PLANE, No. 407, by Sargent and Company, New Haven, Connecticut. This clean example has some minor damage to the base of the front knob, but is otherwise in superb condition. 150 - 300
382. An early ADJUSTABLE SCRAPER by the Union Plane Company, New Britain, Connecticut, patented September 29, 1903. When Stanley acquired the Union Plane Manufacturing Company, they obtained the rights to this scraper, which became the Stanley No. 283. 100 - 200
383. A most interesting and unusual early BIRCH ROLLER SLITTING GAUGE having an octagonal shaft. This very well made cabinet maker's tool has a massive wing nut locking screw and a serrated cutting wheel. It was found in the State of Vermont. 175 - 350
384. An early SOUTHEASTERN PENNSYLVANIA MOLDING PLANE by N. Shovar. This massive hollowing type plane is marked with the "A" designated imprint shown in American Wooden Planes, Fourth Edition. It rates four stars for rarity. 250 - 500
385. TWO EARLY BOSTON MAKER LEVELS, both by L.B. Watts, Maker. Both are fashioned from Cuban mahogany and have integral plumb vials. One has a semicircular side view plate and the other a square plate. Both are in excellent collector quality condition. 100 - 200
386. A rare early PHILADELPHIA MAKER LEVEL by Goldsmith, Philadelphia, Pennsylvania. In addition to the maker name, this tool is marked with the designation "New Mkt. and Green St." Goldsmith is reported as having advertised the manufacture of levels ca. 1857, but this is the first example of his work that we have seen or offered for sale. Rare. 200 - 400
387. THREE SPECIAL PURPOSE WOODWORKING PLANES including a Greenfield fenced pump log plane; an E. Nutting toothing type; and an unmarked birch sun plane. 150 - 300
388. A QUIRK OVOLO WITH BEAD MOLDING PLANE by F. Dallicker, Douglas, Pennsylvania. This triple lignum boxed plane is in excellent collector quality condition. 250 - 500
389. A FRENCH TRIPLE IRON COMPLEX MOLDING PLANE fashioned from walnut. This complex molder forms an intracate molding profile. From the Donald Nesslage Collection. 200 - 400
390. THREE EARLY TYPE BEVELS including an A.G. Avery patent; a "Holdfast" patented December 15, 1914; and a Woodruff & McParlin example crafted from applewood. 150 - 300
391. An example of BUTLER'S PATENT ROSEWOOD MORTISE AND MARKING GAUGE as made by John W. Butler, New Britain, Connecticut, patented January 14, 1873. It has a cam-lock mechanism and is in nearly new condition. 200 - 400
392. A PATENTED TRANSITIONAL JOINTER PLANE, No. 32, by the Standard Rule Company, patented October 30, 1883. This patented transitional plane is in nearly new condition. 300 - 600
393. An early APPLEWOOD HOLLOW MOLDING PLANE by A. Hill. This extra crisp and clean 1 1/4" width example is marked with the date "1828" and the designation "8/10". These planes are attributed to Allen Hill of Foster, Rhode Island, was born in 1805 and was first a woodworker and shop joiner and later a yeoman farmer. A number of planes bearing his imprint are known. All rate four stars for rarity in American Wooden Planes, Fourth Edition. 200 - 400
394. An extra early ROUND MOLDING PLANE by Ce. Chelor, Living In Wrentham. This plane has been shortened at the heel, but has an extra bold imprint. It is marked with the "A" designated imprint from American Wooden Planes, Fourth Edition. 600 - 1200
395. A rare MAYO'S NON-ADJUSTABLE BLOCK PLANE by Babson and Reppellier, Boston, Massachusetts having a letter "M" fixing screw. It missing most of its original paint but is otherwise in excellent condition. A rare and early cast iron block plane. 600 - 1200
396. A CAST IRON SCRUB PLANE, No. 160, by Sargent and Company, New Haven, Connecticut, patented September 22, 1914. Fully 90% of the original black japan finish remains on this extra clean example. An uncommon Sargent plane in uncommonly nice condition. 125 - 250
397. An EXTRA SHORT 1/2" TONGUE AND GROOVE MOLDING PLANE by E.W. Carpenter, Lancaster, Pennsylvania. It is marked with the owner imprint "J. Cain", whose name stamp is included with the plane. 150 - 300
398. A STEEP PITCH COACH MAKER'S BEAD MOLDING PLANE by Nicol. Deas having a yellow birch body and a great early imprint. 150 - 300
399. An example of the FISHER PATENT BEVEL as produced by Disston and Morss, Philadelphia, Pennsylvania, patented June 3, 1868. A section of an IVORY fan has been inlaid in the body of this tool by a previous owner. 300 - 600
400. An early SURVEYOR'S SIGHTING COMPASS by W.J. Young, Philadelphia, Pennsylvania. This vernier adjustment caliper is in excellent condition and includes both sighting vanes. The brass has aged to a uniform dark golden color. 1000 - 2000
401. FOUR SPECIAL PURPOSE WOODWORKING TOOLS, all by Alex. Mathieson & Sons, Glasgow, Scotland. Included in this grouping are a bullnose plane, scorp, jigger and a Warrington pattern hammer. All are in clean and sound condition. 125 - 250
402. TWO SASH RELATED MOLDING PLANES, both by E.W. Carpenter, Lancaster, Pennsylvania. Included are a fixed sash molder and a moving filletster plane fashioned from a tiger stripe piece of beech. From the Carl Bostrom Collection. 100 - 200
403. An early ASTRAGAL MOLDING PLANE by Hazlet, Philadelphia, Pennsylvania. Hazlet is documented as having worked ca. 1817 only. The plane is marked with the "A1" designated imprint shown in American Wooden Planes, Fourth Edition and is rated four stars for rarity. 150 - 300
404. TWO "UR" MAKER MOLDING PLANES including a Bourne boxed bead and an A. Kingsbury quirk reed. Kingsbury was likely Amos Kingsbury, who is reported to have made planes in Southeastern Massachusetts. 200 - 400
405. A MASSIVE PANEL RAISING PLANE, No. 115, by the Ohio Tool Company, Columbus, Ohio having boxwood arms and nuts and a 4" cutting width. It is in excellent collector quality condition. 200 - 400
406. A fully boxed MATCHED PAIR SASH AND COPE MOLDING PLANES by A. Fish, Lowell, Massachusetts. These exceptionally well made planes are in excellent collector quality condition. From the Donald Nesslage Collection. 300 - 600
407. A rare six-inch BRASS BACK DOVETAIL SAW, No. 70, by Henry Disston and Sons, Philadelphia, Pennsylvania. This uncommon small size back saw is in nearly new condition. 175 - 350
408. A DOUBLE FENCED PANEL RAISING PLANE by F. Dallicker, Douglas, Pennsylvania. This massive plane has been boldly struck with the Dallicker imprint. It is also marked with the owner imprint "P. Bitting". From the David Brandt Collection. 200 - 400
409. An UNHANDLED WEDGE ARM PLOW PLANE by Thomas Napier, Philadelphia, Pennsylvania. Napier is documented as having worked from ca. 1773 to 1810. This plane is marked with his "B" designated imprint, which rates three stars for rarity in American Wooden Planes, Fourth Edition. From the William Eviston Collection. 350 - 750
410. TWO CUBAN MAHOGANY SPIRIT LEVELS, both by H.M. Pool, Easton, Massachusetts. One has a plumb vial and the other does not. The 24" length level is marked on the end grain. 100 - 200
411. TWO INTERESTING EUORPEAN PLANES including a deep groove marked with the designation "I.F.V." and a double handle smooth. Both are fashioned from "Cormier" a type of European apple. 125 - 250
412. A later type COMBINATION PLANE by the Siegley Tool Company, Wilkes Barre, Pennsylvania. This example is complete with cutting irons, both sets of arms and the original screwdriver. Fully 99% of the original finishes remain on this, the finest example of the Siegley plane that we have been priveleged to offer for sale. Nice. 400 - 800
413. THREE EARLY EXOTIC WOOD LAYOUT TOOLS including an ebony try square accented with brass; an ebony slitting marking gauge; and a rosewood and brass panel marking gauge. 90 - 180
414. A CRAFTSMAN MADE SET OF MOLDING PLANES including hollow and round, bead, and chamfer types. All are made from maple. These planes were found in Northern Michigan. 125 - 250
415. A rare example of COLE'S PATENT COMPASS PLANE patented on June 6, 1848 and manufactured by A.B. Hoyt. There are no maker marks on this plane, but it is unquestionably the Cole Patent. This plane is illustrated on page 131 or Roger Smith's classic Patented Transitional and Metallic Planes in America, Volume I. 500 - 1000
416. An ENGLISH PATENT EGYPTIAN LAMP by Blackburn, Chelsea, England, Patent No. 2662 of 1867. It is very nicely patinated. Moving the pair of asps that serve as a handle facilitates the opening of the lamp. This lamp anticipated the fascination with Egyptian culture that would be sparked by the discovery of the Tomb of King Tut in 1922 and the exhibition of the treasures of that tomb in the late 1970's. The latter gave us the song lyrics "Buried with a donkey (funky Tut)/He's my favorite Honkey! /Born in Arizona/Moved to Babylonia (king Tut)". We might well have quit when ahead when Egyptian inspired art was a bit more tasteful. More lyrics: http://www.lyricsmode.com/lyrics/s/steve_martin/#share 300 - 600
417. A FANCY CAST BRONZE BLOCK PLANE by master miniaturist Paul Hamler. The plane, which has a cam lever to lock the cutting iron in place is marked on the cutting iron with the maker name and the designation "Flipper". It has an elaborate casting in the side of the plane and is in brand new condition. 200 - 400
418. A SOUVENIR ADVERTISING FELLING AXE by the American Ax & Tool Company, Glassport, Pennsylvania. This most unusual pocket size felling axe was likely designed for handing out to "special" customers at trade shows. One side features advertising for axe makers Lippincott & Company of Pittsburgh and the other a paper label (somewhat faded) and the inscription of William Mann, Lewistown, Pennsylvania. The face of axe is etched with the logo of the American Axe Company, the holding company that coordinated production among a number of American axe manufacturers in the late Nineteenth and early Twentieth Centuries. An important advertising axe in superb condition. 200 - 400
419. TWO EARLY WAGON MAKERS AXLE GAUGES, both having hand wrought hardware. These special purpose tools were used for fitting and repairing wagon underpinnings. 80 - 160
420. A HANDLED ROSEWOOD SMOOTHING PLANE by Norris, London, England. This excellent working plane is fitted with a full A. Hildick parallel iron and is in excellent working condition. 300 - 600
421. A "YANKEE" RADIO TOOL KIT, No. 105, by the North Brothers Manufacturing Company, Philadelphia, Pennsylvania. This example is complete with all original tools in its original box. 250 - 500
422. TWO AMERICAN MAKER BOXWOOD BLOCK PLANES including examples by S.H. Bibighaus and H. Browning. Both have checks near the throat opening but are otherwise clean and clearly marked. These planes provide an illustration of the Achilles Heel of boxwood smoothing planes and illustrate why few were made and even fewer survived. From the William Eviston Collection. 100 - 200
423. A PATENT "COLLIMATOR" MAHOGANY LEVEL by Fairchild & Joyce, New York, New York. This most unusual level is equipped with a sighting feature and is marked with the designation "Pat. Appl'd for." The Fairchild & Joyce Patent was issued on December 18, 1860. There is some damage to the sighting mechanism and this example is offered for parts or restoration. 150 - 300
424. A most interesting and unusual BRONZE FRAME ROSEWOOD INFILL BEVEL. This Nineteenth Century bevel has a dished semi-globular indentation at the joint of the body and the blade that receives the fixing screw. Other examples of identical form have been noted in collections, but little is known of the maker of this high quality bevel. This six-inch example is in nearly new condition. Simply a great bevel of unknown origin. 250 - 500
425. An extra early YELLOW BIRCH CROWN MOLDING PLANE marked with the designation "T * M". It has a distinctive early pattern handle and cuts a classic double ogee profile. this highly detailed early Eighteenth Century plane is in magnificent condition for its age. From the David Brandt Collection. 1000 - 2000
426. A FANCY NINETEENTH CENTURY PLUMB BOB bearing the inscription "S.W. Lombard's 7-25-1883" around the rim at the top. The fancy knurled and turned neck is formed from a single piece of steel. A pretty plumb bob in top collector quality condition. 200 - 400
427. A "RAZOR EDGE" SPOKE SHAVE, No. 84, by STANLEY. This solid boxwood patented shave is in nearly new condition. 100 - 200
428. A SIX-INCH, TWO FOLD FOLDING RULE, No. 13 E having "English" graduations by STANLEY. This uncommon special order rule is marked with the "Sweetheart" logo and is in brand new condition. 100 - 200
429. A CLASSIC "BILECTION" MOLDING PLANE by Cumings & Gale, Providence, Rhode Island. This essentially unused plane came from a group of planes found recently in Northern Maine, all bearing the owner initials "C.R". 100 - 200
430. A PATENTED SEWING MACHINE MARKING GAUGE by Calvin D. Wheeler, New York, New York, patented February 14, 1860. An early special purpose patented gauge in excellent collector quality condition. 125 - 250
431. TWO ROSEWOOD BOXED BEAD MOLDING PLANES including examples by T. Donoho in the 3/4" size and an unmarked 1/2" size example. From the William Eviston Collection. 100 - 200
432. An UNHANDLED BOXWOOD PLOW PLANE having boxwood arms and nuts by A. and E. Baldwin, New York, New York. This very nicely patinated plane has a bow in one arm and some minor thread chips, but is otherwise perfect. 200 - 400
433. A 3/8" WIDTH DADO PLANE, No. 39, by STANLEY. This "Sweetheart" era trademark example is in new condition in its original pasteboard box. Absolutely perfect. 250 - 500
434. An UNUSUAL DOOR MOLDING MOLDING PLANE by Isaac Field, Providence (Rhode Island). This early double iron plane has been boldly struck with the Field imprint and is in clean and sound condition. From the Donald Nesslage Collection. 100 - 200
435. A PATENT POSTWAR SMOOTHING PLANE, No. A 5, by Norris, London, England. This Patent adjustment plane retains it full, original Norris cutting iron and is in excellent working condition. 250 - 500
436. An EBONY RAZEE SHIPWRIGHT'S PLANE having a beech handle. This classic exotic wood plane is in nearly new condition. Extra special. 200 - 400
437. A "BULLNOSE" BLOCK PLANE, No. 101 1/2, by STANLEY. These planes, which were never illustrated in Stanley's catalogues, are found much more frequently in England, where they were likely marketed. This example of the rare First Model has no provision for the dimpled finger rest that was incorporated on theater version. The first example of this rare variation that we have offered for sale. 500 - 1000
438. A SALESMAN'S SAMPLE KIT OF BILL POSTERS HAMMERS, all by A.R. Robertson, Boston, Massachusetts. This hinged wooden box is divided into sections to house each of these slightly different variations of the Robertson hammer which vary in length, width and finish. It is difficult to conceive of a rationale for so many slightly different variations in the head of a hammer that would compel a salesman to bring all of these to a sales call, so it seems more likely that these were kept in the factory and may have been produced in the process of experimenting with the ideal configuration of a bill poster's hammer head. They were found this Spring in the cellar of an antique dealer just North of Boston. Important. 500 - 1000
439. A MASSIVE SKEW IRON PANEL RAISING PLANE fashioned from applewood and very nicely patinated. 150 - 300
440. An example of "THE CLIMAX" PATENT PRUNER, No. 1, by the Novelty Manufacturing Company, New Bedford, Massachusetts, patented May 16, 1873. Finding "high gizmocity" items in new condition in their original box is one of the things that make tool collecting so enjoyable. This 1877 patent pruning device is in absolutely perfect condition with original rope in its original wooden box with full, bright paper label. Looking at it is like visiting a Nineteenth Century hardware store. This is the only example of this tool we have encountered in or out of the box. Rare and perfect. 250 - 500
441. An early CAST IRON COFFEE GRINDER, No. 2, by the Enterprise Manufacturing Company, Philadelphia, Pennsylvania. Fully 80% of the original paint remains on this Nineteenth Century classic. 200 - 400
442. An example of the CHENEY PATENT COMBINATION ANVIL AND VISE, No. 90 as produced by the Fulton Iron and Engine Works, Detroit, Michigan in accordance with the specifications of the United States Patent issued to James W. Cheney of Detroit, Michigan on November 18, 1879. This early combination metal working tool is cast on the sides with the maker name and patentee information. A great accent for the shop that is in excellent working condition. 125 - 250
443. A SET OF ELEVEN BULLET MOLD AUGER BITS. These bits were reportedly used for hollowing out iron for the production of bullet molds. A wide range of caliber sizes are included as is the original iron brace with which they were found. 300 - 600
444. A FENCED QUIRK ROUND MOLDING PLANE by Iohn Sleeper. It is fasjopmed from beech and is in nearly new condition. 90 - 180
445. An EBONY "ULTIMATUM" BRACE by Robert Marples, Hermitage Works, Sheffield, England. This English classic retains its original ivory ring and is in clean and sound condition. 200 - 400
446. An early TONGUE MOLDING PLANE by I. Doggett, Dedham, Massachusetts. Doggett worked ca. 1780. The Doggett imprint rates FIVE STARS for rarity in American Wooden Planes, Fourth Edition. 600 - 1200
447. An early HARDWARE STORE ADVERTISING DISPLAY of fasteners by English makers Guest, Keen & Nettlefolds, Ltd. A wide variety of bolts, screws, etc. are arranged in patterns under glass in their original wooden frame. These frames were designed for mounting on the walls of hardware stores to illustrate the product line of the manufacturer. This well-preserved example is in clean and sound condition, noting some tarnish on some of the fasteners. 200 - 400
448. A rare and very well preserved fourteen-inch length O.B. FULLER PATENT INCINOMETER LEVEL by the Pittsburg Novelty Company, Pittsburg, Kansas, patented September 18, 1887. This is only the second example of this short-size version of this tool of which we are aware. Rare. 800 - 1600
449. An early WEDGE ARM PLOW PLANE by L. Little, Bofton, Massachusetts. It has been boldly struck with this distinctive imprint. There are some minor body checks, but the plane is otherwise clean, complete and sound. It has a most appealing smooth and shiny patina of age and use. 200 - 400
450. A FIVE AND ONE-HALF INCH SMOOTHING PLANE, No. 1, by STANLEY. The cutting iron is marked with the ca. 1920's era "Sweetheart" trademark on this absolutely brand new condition example. As good as they get. 1000 - 2000
451. An early manufactured type SKEW BLADE SPILL PLANE. This classic Nineteenth Century tool is in clean and sound condition. 250 - 500
452. A SET OF ELEVEN "EVERLASTING" BEVEL EDGE FIRMER CHISELS, all No. 20, by STANLEY. These extra long chisels have the undulating handles that characterized the "No. 20" series of "Everlasting" chisels. All are marked with the maker name and the patent information. All are in excellent collector quality condition and could be put directly to use. From the William Wensel Collection. 1000 - 2000
453. THREE SPECIAL PURPOSE MOLDING PLANES, all by Alex. Mathieson and Sons, Glasgow, Scotland. Included are a triple reed, a quarter round and a fenced ogee. Two are marked with the designation "B.B. & Co./LIMITED" From the Carl Bostrom Collection. 100 - 200
454. A PLATINUM THERMOCOUPLE GAUGE as produced by the Brown Instrument Company, Philadelphia Pennsylvania. This electronic device was used to gauge the precise temperature in an industrial oven used for melting glass. It is fitted with dual electrical leads and housed in its origianl mahogany case. The temperature scale on the face reaches 1600 degrees Celsius--much hotter than one can judge using the tip of the finger. This well made device is in brand new condition and retains all of its original lacquer finish on the brass case. 200 - 400
455. A rare and nicely colored TURNED IVORY PLUMB BOB fitted with a removable screw cap and offered with its original turned brass keeper. From the John Meneely Collection. 300 - 600
456. A HOLLOW BRASS SURVEYOR'S "PLUMMET" TYPE PLUMB BOB. These tools were used for sighting transits in dark mine shafts. This is the first example of this type that we have seen, which comes to us from the Pennsylvania coal mining region. 250 - 500
457. A SET OF TWELVE IVORY HANDLE ENGRAVING TOOLS complete with two ebony handle guides that have ivory fittings on the end. All are in spectacularly well preserved condition. From the John Meneely Collection. 500 - 1000
458. A HANDLED SLITTING MARKING GAUGE by E.W. Carpenter, Lancaster, Pennsylvania. There is a minor repair below the handle. It is marked with the owner imprint "J.L. Kuehn". This is the first such gauge bearing the imprint of this respected Southeastern Pennsylvania maker of which we are aware. Rare. 800 - 1600
459. A TAIL HANDLE BLOCK PLANE, No. 9 3/4, by STANLEY. Approximately 50% of the original black japan finish remains on this early example that has the "arch" pattern trademark used on the earliest Stanley planes imprinted on the cuttin iron. A nice example. 200 - 400
460. A rare and very well preserved PATENT BENCH MICROMETER by Randall & Stickney, Waltham, Massachusetts. This early micrometer was produced under a patent issued on August 21, 1883. It retainsnearly all of its original black japan finish and decal and is in top collector quality condition. 200 - 400
461. An ONE-FOOT, FOUR-FOLD FOLDING RULE of IVORY and German silver, No. 98 1/2 by Stephens & Company, Riverton, Connecticut. This white and crisp caliper slide rule is in top collector quality condition, noting only some minor age yellowing of the outside face. A rare Stephens rule in superb condition. From the John Meneely Collection. 300 - 600
462. A classic COOPER'S BEER KEG CHAMFER KNIFE by P. Weber and Company, Milwaukee, Wisconsin. This uncommon special purpose cooper's tool includes its original tripod and is in excellent collector quality condition. 200 - 400
463. An extra COMPLEX HANDLED CORNICE MOLDING PLANE by John Veit, New Market and Green Street, Philadelphia, Pennsylvania. The unusual cut forms a half round, quarter round, square and ogee pattern. It is in extra crisp and clean condition, noting a "pull hole" bored through the front. 500 - 1000
464. A MOST UNUSUAL CURVED SASH MOLDING PLANE by J. Stiles. This most unusual short length plane is marked with the date "1810". From the Donald Nesslage Collection. 300 - 600
465. FIVE CLEAN BRASS PLUMB BOBS, all marked with maker names. Examples by Millers Falls, Standard, Keuffel & Esser, Berger and W. & L.E. GURLEY are included. All are in top collector quality condition. 100 - 200
466. A rare IVORY CORDAGE CALCULATION RULE by Edward Preston & Sons, Birmingham, England. This top quality scale is fitted with a German silver caliper and graduated with multiple scales. It is imprinted on the rounded end of the caliper with the designation "Craven & Speeding Brothers, Sunderland". A pretty rule in excellent collector quality condition. From the John Meneely Collection. 400 - 800
467. A SOLID IVORY MASONIC RITUAL RULE fully bound with German silver. This rule is absolutely bright white and crisp as the day it was made. One side of the rule is divided into three sections of eight, reportedly to symbolize the three sections of the day into which adherents to the Masonic Order divide their time: Work, Service and Rest. The other side is marked in inch graduadtions. It is in essentially unused condition. From the John Meneely Collection. 1500 - 3000
468. An extremely rare example of HOGARTY'S PAENT IVORY FOLDING RULE with caliper slide by the Acme Rule Company. This German silver bound rule is marked on the German silver caliper with the designation "Acme Rule Company" and "Pat. Appl'd. for". The December 22, 1891 U.S. Patent of Michael Hogarty is for a rule manufacturing process that is designed to conserve ivory by using thin strips of ivory pinned to a base material. This example is in nearly new condition. From the John Meneely Collection. 800 - 1600
469. A rare SET OF GUNSTOCK MAKERS MOLDING PLANES, all by documented gunmaker Nathan Moll, Lehigh County, Pennsylvania. All are dated "1854". Nathan was born 1833. A seldom seen set of working tools of an American gunsmith. From the William Eviston Collection. 500 - 1000
470. A copy of the picture book of French tools LE LIVRE DE L'OUTIL by Andre Veltier Marquis Velter and Marie Jose Lamothe. This large folio volume includes photographs of some of the most spectacular hand tools ever produced, many of which are housed in European museums. The text is in French, but words in any language fail in describing the spectacular photographs by Jean Marouis that appear on nearly every page. Long out of print and a must for the tool collector's library. 300 - 600
471. A ONE-FOOT, FOUR-FOLD FOLDING RULE of IVORY and German silver, No. 39, by STANLEY. This bright white rule has extra tight joints and is in nearly new condition. It is clearly marked with both the Stanley name and the product number. Only one of every hundred ivory rules is found in this condition. From the John Meneely Collection. 500 - 1000
472. An ONE-FOOT, FOUR-FOLD IVORY FOLDING RULE, No. 40, by STANLEY. This pristine example is in perfect, original condition in its original leather case. The way you wish they all were. Extra nice and highly recommended. From the John Meneely Collection. 600 - 1200
473. A rare SIX-INCH, TWO-FOLD FOLDING CALIPER RULE of IVORY and German silver, No. 40 1/2, by the Stanley Rule & Level Company. A rare Stanley ivory rule in nearly new condition. From the John Meneely Collection. 300 - 600
474. A ONE-FOOT, FOUR-FOLD FOLDING RULE of IVORY and German Silver, No. 88, by STANLEY. This arch joint, fully bound rule is in bright white, tight condition and clearly marked with the Stanley name and product number. As good as they get. From the John Meneely Collection. 400 - 800
475. A SET OF THREE MINIATURE TRANSITIONAL PLANES, all by master miniaturist Paul Hamler. These masterfully crafted replicas of Stanley's ca. 1870's transitional planes are marked with the early eagle trademark and are in brand new condition. Every detail, down to the last screw is identical to those used on the originals. All of the original finishes remain and the planes are in perfect condition. A great set. 400 - 800
476. An EARLY MARINE OCTANT by T.F. Williams, Cardiff, Wales. This maker originally worked in Bristol, England. The IVORY scale is marked with the designation "Patent Composite". The mirror is in need of re-silvering, but the instrument is otherwise in top condition. From the John Meneely Collection. 500 - 1000
477. An "OHIO" NO. 2 C SMOOTHING PLANE, No. 02 C, by the Ohio Tool Company, Auburn, New York. This example has the later type maroon color finish. There are some chips from the throat of the plane, but it is otherwise excellent. 250 - 500
478. An ADJUSTABLE CAST IRON BLOCK PLANE by the Standard Rule Company, Unionville, Connecticut, patented October 30, 1883. This example of the Solon Rust patent is in need of a cleaining, but it is complete and in sound condition. A rare patented block plane. 200 - 400
479. An early BRASS STEAM ENGINE MODEL by E.P., Germany. This highly detailed model looks to date from ca. 1900, or thereabout. It is in top condition and mounted on its original mahogany base. 175 - 350
480. A PATENT DOUBLE BLADE SPOKE SHAVE, No. 62, by STANLEY, patented April 18, 1876. Some 85% of the original black japan finish remains remains on this clean and complete example. 80 - 160
481. An early beech "YANKEE" PLOW PLANE having applewood and iron fixing screws by I. Lindenberger, Providence, Rhode Island. The tote has been boldly struck with the diestinctive imprint of this early American planemaker. 350 - 750
482. An example of JONES' REGISTERED MARKING GAUGE. This extra clean British tool is marked with the designation "Reg. No. 13042" and the Jones name. This is the first example of this innovative mortise gauge that we have seen or offered for sale. Rare. 200 - 400
483. A PATENT COMPLEX ADJUSTABLE NUT WRENCH by G.F. McIntyre, Port Chester, New York, patented June 25, 1907. This elaborate wrench has multiple levers and adjustments. There is some pitting on the body, but the tool is mechanically sound and clearly marked with the patent date. 175 - 350
484. A SINGLE IRON GOTHIC BEAD MOLDING PLANE by L. Fox and Son, Amherst, Massachusetts. Fox worked in the 1830's. This example is in nearly new condition. 150 - 300
485. An EBONY INFILL GUNMETAL SHOULDER PLANE in the 1 1/4" width. This plane retains its full original cutting iron. 200 - 400
486. THREE "TOY" SIZE BLOCK PLANES, all by STANLEY. Included are a No. 100, a No. 100 1/2 and a No. 101. All have the later type red cap iron and are in essentially unused condition. 100 - 200
487. A CRAFTSMAN BRAND MACHINISTS OAK TOOL CHEST by Sears, Roebuck & Company, Chicago. This very little used example looks to have been produced in the 1950's, or thereabout. It retains its original Craftsman logo plate on the lower drawer. 125 - 250
488. An ELABORATELY DECORATED AXE, most likely employed for ceremonial or ritual use. Stylized raised decorations cover every square inch of the face of this very well made and well preserved axe. The handle is hollow and may have been designed to allow the axe to be mounted on a shaft. 200 - 400
489. A PATENT BEECH BODY SCREW ARM PLOW PLANE having applewood arms and nuts by the Multiform Molding Plane Company. This plane applies the August 29, 1854 United State Patent of Thomas Worrall for a series of wooden planes having interchangeable handles. This clean and well presereved example retains its original applewood handle and is in excellent collector quality condition. 750 - 1500
490. A SEVEN-INCH SMOOTHING PLANE, No. 7, by the Millers Falls Company, Millers Falls, Massachusetts. This equivuivalent to Stanley's "No. 2" is in clean and complete condition and marked with the product number on the side of the body. 225 - 450
491. FOUR YELLOW BIRCH MOLDING PLANES including one bearing the imprint "Palmer", which has been identified as a "UR" maker in American Wooden Planes. Some complex cuts are included in this grouping. 100 - 200
492. A FULL SET OF CUTTING IRONS, all by STANLEY for a No. 55 plane. This set includes four boxes hooked together with a single sleeve to cover all. 150 - 300
493. A classic YELLOW BIRCH YANKEE PLOW PLANE by I. Clark. Clark is reported to have worked ca. 1820. This boldly struck plow has a replaced wedge and a screw through the body, but is worthy of restoration. 300 - 600
494. An early OAK ROUNDING ENGINE having hand forged hardware. It is very nicely patinated. 80 - 160
495. THREE BRASS AND IRON PROTRACTOR TOOLS including examples by Stanward & Smith, Patented 1914; Gagnon & Hawthorne; and a C.W.S. Co. 12 in One Tool. All are in top collector quality condition. 125 - 250
496. A TWO-FOLD BOARD MEASURE FOLDING RULE, No. 22, by the Standard Rule Company, Unionville, Connecticut. Rare early maker marked rule has minor stains on the varnish, but is otherwise in top condition. 200 - 400
497. THREE EARLY SPIRIT LEVELS, all by Stratton Brothers, Greenfield, Massachusetts. Included is one double plumb type. All are fashioned from mahogany. Examples in the 24", 26" and 36" sizes are included. 125 - 250
498. A rare "TYPE 2" MITRE PLANE, No. 9, by STANLEY. This rare "horizontal screw" model retains is proper original cap and blade, but the body and handle are both cracked. Offered for parts or restoration. 200 - 400
499. An extremely rare example of DUNN'S PATENT GUMMER & SAW SET by Phinehas & Charles W. Dunn, Cleveland, Ohio, patented September 4, 1883. This uncommon lever-operated saw set has earned the "NS" rating for "Not Seen" in the Friberg book on "Patented American Saw Sets". This is the first example of this tool that we have seen or offered for sale. Rare. 175 - 350
500. An extremely rare EARLY TWENTIETH CENTURY STANLEY SIGN by STANLEY. These signs were produced by the New York Metal Ceiling Company and are so marked in one corner. Designed to be mounted on a wall, there is a 90 degree bend in at the end to allow the sign to be screwed in place. This is only the third example of this ca. 1910 Stanley sign to be found. Other than some minor scratches in the paint, the sign is in perfect condition, retaining the rich, bright colors of the day it was made. Extremely rare and highly recommended. 2000 - 4000
501. A STEEL BODY JACK PLANE, No. S 5, by STANLEY. The cutting iron is marked with the "Sweetheart" era trademark on this extra clean example, which retains some 95% of its original black japan finish. The steel surfaces of Stanley's "S" series of planes showed little affinity for paint and and example retaining this degree of original finish is a true rarity. 100 - 200
502. An rare and very well preserved ADJUSTABLE CABINET SCRAPER, No. 283, by STANLEY. This, the least common of Stanley hand scrapers, has rosewood handles and is marked with the ca. 1920's "Sweetheart" trademark. A very well preserved example of the least common of Stanley's handled scrapers. 150 - 300
503. TWO AMERICAN MAKER MOLDING PLANES including a bead plane with rosewood interrupted boxing by M. Deter that rates three stars for rarity and a filletster plane by Benjamin Brazer, Lowell, Massachusetts, another three star maker who worked between 1832 and 1835 only. 150 - 300
504. A LOW ANGLE MITRE PLANE by John Smiley, Lowell, Massachusetts. This plane is marked with Smiley's "A2" designated imprint from American Wooden Planes, Fourth Edition and rates four stars for rarity. 80 - 160
505. TWO DOUBLE BEAD MOLDING PLANES, both by J. Kellogg, Amherst, Massachusetts. Included are a 5/8" full boxed and a 3/4" side boxed example. Both are in top collector quality condition. 125 - 250
506. A classic NINETEENTH CENTURY MACHINISTS TOOL CHEST complete with many original tools including several J. Stevens Arms & Tool Company tools in their original boxes. The original key is with the box, which is missing the "bails" from the handles, but is otherwise perfect. 200 - 400
507. FOUR EXTRA CLEAN BENCH PLANES, all by Sargent & Company, New Haven, Connecticut. Included are a No. 408 smoother; a No. 409 smoother; a No. 414 jack and a No. 418 fore type. Also included is a No. 62 handled scraper. All are in top collector quality condition. 100 - 200
508. THREE EARLY HAND FORGED TOOLS including a twybil embellished with saber mks; an iron brace of unusual form; and a bowl adze marked with a "fleur de lis" imprint. 125 - 250
509. TWO ADVERTISING DISPLAY CABINETS, both by the Pike Manufacturing Company, Pike, New Hampshire. These whetstone display boxes are ornamented with Pike's distinctive Northern Pike logo. 100 - 200
510. An early WOODEN GRAIN SHOVEL fashioned from basswood and very nicely patinated. 80 - 160
511. A MINIATURE ENGLISH TYPE MARKING GAUGE by Paul Hamler. Artfully crafted from IVORY and brass, this palm-size gauge is in brand new condition. 250 - 500
512. A MINIATURE SIZE ROSEWOOD CENTER WHEEL PLOW PLANE as produced by noted miniaturist Paul Hamler. This is only the third example of this Hamler classic that we have been privileged to offer for sale. 300 - 600
513. An early HINGED SOLID OAK TOOL CHEST by Hammacher Schlemmer and Company, New York, New York. This extra clean chest retains its original key and nearly all of its original finish. 100 - 200
514. THREE CLEAN COMPLEX MOLDING PLANES, all by Kennedy, Utica, New York. Included are a 1/2" reed and follow; a 5/8" quirk ovolo with square; and a 4/8" quirk ovolo with astragal. All are in top collector quality condition. 200 - 400
515. A SIX-INCH IVORY CALIPER RULE, No. 95 1/2, by Stephens & Company, Riverton, Connecticut. This clean and sound rule dates from the 1880's. It has uniform medium dark yellowing, but is otherwise in excellent condition. 100 - 200
516. A SOLID BRASS BAILEY PATENT SPOKE SHAVE by the Bailey Tool Company, Woonsocket, Rhode Island. This example of the distinctive Joseph R. Bailey lever lock spokeshave patent is marked with the patent date of July 26, 1870. This is the first all-brass example of this shave that we have seen. 200 - 400
517. A COACH MAKERS DOUBLE PISTOL ROUTER fitted on each face with full brass facing. This classic coach maker's tool is in excellent condition and has a most appealing smooth, golden patina from age and years of careful use. 100 - 200
518. A scarce and perfect INTERNAL REEL PLUMB BOB by the Keuffel & Esser Company, New York, New York. The body of the tools is not marked with the maker name, but it exactly matches the type shown in early Keuffel & Esser catalogs. 175 - 350
519. An extremely rare example of STOW'S PATENT BIT BRACE as produced by the Peck Stow & Wilcox Company in accorance with the specifications of the August 12, 1879 United States Patent issued to Orson Stow. This brace has been given the "NS" rating in Ron Pearson's "American Patented Braces" meaning that at the time of publication, despite extensive research, no examples of the brace had yet surfaced in the many collections surveyed. 100 - 200
520. A 1/4" width CAST IRON DADO PLANE, No. 39, by STANLEY. Some 95% of the original paint remains on this superb example that is marked with the ca. 1920's "Sweetheart" Trademark. 100 - 200
521. A rare FENCE FOR A NO. 14 "VICTOR" PLOW PLANE by L. Bailey & Company, Hartford, Connecticut. This uncommon and frequently broken part is in excellent condition, retaining some 95% of its original black japan finish. 100 - 200
522. A rare "MUSICAL" HAND SAW, No. MS, by Henry Disston & Sons, Philadelphia, Pennsylvania. This uncommon Disston offering is in nearly new condition in a fitted oak case, complete with original bow, resin and sheet music. 200 - 400
523. A COLLECTION OF EARLY TYPE GLASS CUTTERS including one circular type as well as examples by Millers Falls. Goodell-Pratt, etc. All are in top collector quality condition. 100 - 200
524. A EIGHTEENTH CENTURY IVORY HANDLE BUTTON HOLE. The turned ivory handle is highly detailed. There are some chips from the end of the blade, but it is otherwise in excellent condition. 100 - 200
525. An extremely rare and very well preserved example of the JACK PLANE SIZE FOSTER'S TURNTABLE METALLIC PLANE as patented and produced by Edwin W. Foster, Central Park, New York in accordance with the specifications of the Foster Patent of January 29, 1907. This is only the second example of this plane in this size of which we are aware. Examples of the smoothing plane version of this high gizmocity spinning frog tool are quite scarce, but this is only the second example of the jack plane we have seen in twenty-six years. 3000 - 6000
526. A rare SIX-INCH SIZE ROSEWOOD AND BRONZE PATENT BEVEL by the St. Johnsbury Tool Company, St. Johnsbury, Vermont. This example of the Isaiah J. Robinson Patent of June 14, 1870 is in top collector quality condition and clearly marked with the patent date. 250 - 500
527. A EIGHTEENTH CENTURY GUINEA BALANCE SCALE by Anthony Wilkinson, Ormskirk, England. The pracice of shaving gold from the edges of coins had become so commonplace by the time this scale was produced that traders took to evaluating the weight of coins against what they should weigh and accepting them in trade based on an apportioned value for those that had been altered. This scale includes its original paper label and is in top condition. Wilkinson is reported to have died in 1804, so this scale would almost certainly have been produced in the Eighteenth Century. 125 - 250
528. An extremely early PATENT QUICK ADJUST WRENCH by A. Hotchkiss, Sharon, Connecticut. Produced under the specifications of United States Patent No. 8,922 granted to one Andrew Hotchkiss of Sharon, Connecticut on May 4, 1852, this spring activated "push button" wrench is among the first quick adjust wrenches patened in the United States. As was so often the case with those who came up with creative ideas for patented tools in the years before the Civil War, the maker of this wrench was possessed of mechanical and manufacturing skill far beyond the standard of the time. The spring activated lower jaw is still as tight and the mechanism just as smooth as it was more than 150 years ago. The upper jaw is marked on both sides with the maker name and patent date on one side and the designation "Hotchkiss Patent" on the other. The skill and creative genius of Andrew Hotchkiss nothwithstanding, this wrench was likely a dismal failure in the marketplace, being too costly to produce and far beyond the needs of the average workman. The handle has some longitudinal checks that have been glued, but the wrench is otherwise mechanically perfect. A quintessentially classic patented American wrench is excellent working order. As good as they get. 1000 - 2000
529. A "TURK'S HEAD" CUTTER FOR PUMP LOG HEADS this ca. 1840's tool was used for cutting the joint used in joining the sections of wooden logs for transporting water. 80 - 160
530. A DOUBLE IRON GOTHIC BEAD MOLDING PLANE by E. Baldwin. This plane has a removable screw-on side that appeas to be original to the tool. It was likely included to allow the plane to function as a "gothic bead and follow". The plane is in top collector quality condition and boldly struck with the Baldwin imprint. 125 - 250
531. A 7 1/2" length SMOOTHING PLANE, No. 2, by the Union Manufacturing Company, New Britain, Connecticut. Fully 90% of the original black japan finish remains on this uncommon offering from Stanley's cross town competitor. 150 - 300
532. THREE EXTRA CLEAN COMPLEX MOLDING PLANES including a Way & Sherman quirk ovolo with bevel; a Jos. Gibson quirk ovolo with bevel; and a bilection plane marked only with the designation "No. 158". 150 - 300
533. An early style "TABLE" SAW by Henry Disston and Sons, Philadelphia, Pennsylvania. This extra long saw has the distinctive early "nib". A number has been etched on the face of the blade, but the saw is otherwise perfect. 80 - 160
534. An early "LONDON" SPRING STEEL SAW, No. 12, by Henry Disston and Sons, Philadelphia, Pennsylvania.This early saw has the distinctive protruding nuts and wheat carved handles. 80 - 160
535. An IVORY TIP ROSEWOOD PLOW PLANE having rosewood arms and nuts and four IVORY tips, No. 103, by the Ohio Tool Company, Columbus, Ohio . This very nicely patinated solid rosewood plane has some minor wedge dings, but is otherwise excellent. 350 - 750
536. TWO EARLY MEDICAL TOOLS including an Evans of London surgical saw and a trepanning brace by Drapier. Both are in top collector quality condition. 200 - 400
537. A COACHMAKER'S SLIDING DOVETAIL MOLDING PLANE by I. Gleim. This uncommon plane has been boldly struck with the distinctive oversize imprint of this obscure maker who is believed to have worked in Pennsylvania. 200 - 400
538. A LAMINATED SMOOTHING PLANE fashioned from maple and mahogany. It is marked with the owner imprint "H. Anderson". 80 - 160
539. A SOLON RUST PATENT JOINTER PLANE by the Meriden Malleable Iron Company, patented May 16, 1882. This uncommon eraly plane has a replaced cutting iron and some cracks in the tote, but it is otherwise complete and in excellent condition. 600 - 1200
540. A MASSIVE PANEL RAISING PLANE by George Burnham Jr., Amherst, Massachusetts. This 5" overall width plane is in excellent collector quality condition. 150 - 300
541. An early TAILOR'S RULE by L. Ward, Newark, New Jersey. It is marked with the designation "Mme. Mallison, Washington, D.C. Despite its documented association with a Washington D.C. madam, we can offer no provenance of association with former New York governor Elliot Spitzer. Lest the rule's reputation be sullied by even the possibilty of such an association, we shall refer to it at the auction simply as "Rule No. 9". A very well preserved special purpose rule bearing the imprint of an early New Jersey maker. 150 - 300
542. A DOVETAILED NINETEENTH CENTURY MACHINIST'S TOOL CHEST fashioned from solid oak and nicely accented with brass. This velvet lined chest has slots for holding rules set in the trays. In addition to being a masterfully crafted chest, this box offers the added advantage of serving as a storage point for small collectible tools. 200 - 400
543. An example of the ROBINSON'S PATENT TRY SQUARE as produced by the St. Johnsbury Tool Company, patented July 14, 1874. This 6" blade length square is in top collector quality condition. 125 - 250
544. TWO INTERESTING MOLDING PLANES, both by E.W. Carpenter, Lancaster, Pennsylvania. Included are a 7/8" "V" groove and a quarter round having a great grain pattern. From the Carl Bostrom Collection. 125 - 250
545. TWO EXTRA CLEAN FOLDING RULES, both by STANLEY. Included are an early No. 83 with extension slide and a No. 60 double arch joint. Both are in clean and sound condition. 200 - 400
546. An early COMPLEX MOLDING PLANE by J.J. Angermeyer, Connoquensing Township, Pennsylvania. Angermeyer is reported to have worked between ca. 1820 and 1830 only. The Angermeyer imprint rates four stars for rarity in American Wooden Planes, Fourth Edition. 200 - 400
547. TWO ENGLISH MAKER HAND SAWS including a 6" dovetail saw marked "Dawes" and a J. Taylor four-medallion crosscut saw. Both are in clean and sound condition. 80 - 160
548. A complex turn-of-the-century inclinometer level produced by EDWARD HELB/RAILROAD, PENNSYLVANIA, patented July 12, 1904. These were used on railroads as often as tools made in Buffalo, New York were employed on the American Bison. One of the best examples of this tool that we have offered in some time. It is in nearly new condition in a fitted leather carrying case that may have been provided with the tool. 250 - 500
549. A scarce MC CAULEY'S PATENT CORE BOX PLANE as produced by William Bayley, Springfield, Ohio. This specialized plane was patented on February 9, 1904 and employs as the core of its genius a ratchet mechanism that moves the core box cutting iron through a semicircular arc, thus obviating the need to move the entire plane as the planing progresses. This example is clean, complete and mechanically perfect. 200 - 400
550. An early BRASS BODY SURVEYOR'S COMPASS by H.M. Pool, Easton, Massachusetts, complete with with Jacobs staff attachment. The face cover is missing, but the compass is otherwise complete and excellent. 750 - 1500
551. A "VICTOR" CIRCULAR PLANE, No. 20, by Leonard Bailey & Company, Hartford, Connecticut. This cam-lock cap iron example is in superb condition, retaining some 90% of its original finishes. A nice example. 600 - 1200
552. An early MASSACHUSETTS MAKER MOLDING PLANE by E. Pierce. This ca. 1790's handled spar plane is in nearly new condition. It has been boldly struck with Pierce's "A" designated imprint which rates four stars for rarity in American Wooden Planes, Fourth Edition. 600 - 1200
553. An early COVE AND BEAD COMPLEX MOLDING PLANE by S. Caruthers, Philadelphia, Pennsylvania. Caruthers is the earliest documented Philadelphia maker. He is documented as having worked from ca. 1745 to 1771. His imprint rates four stars for rarity. 250 - 500
554. A WORKING SET OF SIX CRANK NECK GOUGES, all by Buck Brothers, Millbury, Massachusetts. All retain their original applewood handles. A number of different sizes and sweeps are included in this extra clean set. 120 - 240
555. TWO LOG MARKING HAMMERS including a handled example that marks the designation "C-" and an unhandled example that marks the imprint "+r". These stamps might have been used to imprint a Martin J. Donnelly report card with grade markings and a recommendation for after school remediation in the early years when he was "educated" by nuns before they mercifully threw him to the devil. It has been all uphill from there. 125 - 250
556. An extra early SHIPWRIGHTS DOUBLE BLADE BEVEL by Belcher Brothers and Company, New York, New York. Thus early bevel has only some minor stains and ding in the body to note as apologies. The distinctive "Old English" maker mark appears as if it was struck yesterday. 100 - 200
557. A BRASS BOUND MINIATURE IVORY LEVEL by Paul Hamler. This diminutive level is imrprinted with the Stratton Brothers logo and is in brand new condition. Paul Hamler has lately turned his creative energies to the making of miniature Kentucky rifles. We expect that demand for his tool miniatures, which he will no longer be producing, to increase substantially. Get 'em before they're hot. 250 - 500
558. A SIX-INCH, TWO-FOLD IVORY FOLDING RULE, No. 0. We have observed a number of these brass-fitted rules, but there is no maker designation. 80 - 160
559. An unusual ONE-FOOT IVORY FOLDING RULE that is graduated with both Metric and English graduations on one side and has fish engraved on the reverse side. 80 - 160
560. An unusual SPECIAL PURPOSE DOUBLE IRON JOINTER PLANE having a leaf spring regulator to keep the plane close to the work and a wide wooden fence. It is dated "1912" on the nose. This plane is unlike anything we have previously encountered. We invite those who are rhykenologically inclined to wax eloquent on the potential original intended use of this most unusual woodworking tool. 350 - 750
561. An early PROMOTIONAL HATCHET by the American Ax & Tool Co., Glassport, Pennsylvania. Undoubtedly produced as a keepsake for very important customers visiting the booth of the American Ax & Tool Company at the National Hardware Association 10th Annual Convention, which was held in Atlantic City, New Jersey, this extraordinary hatchet head is elaborately decorated with both the details of the convention and, on the reverse side, an image of Winged Victory holding aloft a banner reading "Progress" beneath a shield that proclaims "Compliments of the American Axe & Tool Company, Glassport, Pa." Nearly all of the original blued finish remains on this rare advertising collectible. An exceptionally well made artifact from the last great days of the hand tool era when the American Dream meant more than three years of government borrowed unemployment benefits. 600 - 1200
562. A MASSIVE HANDLED WALNUT ROUTER PLANE having a chip from tote tip. This Nineteenth Century plane has a most appealing dark golden patina from age and years of careful use. From the William Eviston Collection. 200 - 400
563. A rare LEFT-HAND QUARTER ROUND MOLDING PLANE by Thomas Napier, Philadelphia, Pennsylvania. It is marked with the owner imprint "J.H. Baker". Most unusual type. We have reason to believe that Mr. Baker may have been a southpaw. 100 - 200
564. An EARLY PATENT SPOKE SHAVE by Elijah Holmes, Lynn, Massachusetts, patented January 1, 1856. An uncommon early patent shave that has the maker name and patent date imprinted on a brass medallion inlaid in the body of the tool. 100 - 200
565. An early QUARTER ROUND MOLDING PLANE by Hezekiah Niles, Philadelphia, Pennsylvania. Niles opened a planemaking shop in Philadelphia in 1764, but few examples of his work are known to exist. His imprint rates four stars for rarity in American Wooden Planes, Fourth Edition. From the William Eviston Collection. 150 - 300
566. THREE EARLY BOSTON MAKER LEVELS, all by L.B. Watts, Maker. All are fashioned from Cuban mahogany. Two have an eagle imprint and one is fitted with brass end plates. 100 - 200
567. An example of the MOSHER'S PATENT SMOOTHING PLANE by the Birmingham Plane Manufacturing Company, Birmingham, Connecticut. This example of the Mosher Patent of December 16, 1884 is clean, complete and retains fully 85% of the original black japan finish. 300 - 600
568. An early LEATHER WORKERS FOOT OPERATED VISE fashioned from oak and yellow birch. This early vise of sculptural form has a distinctive wooden extension horn on the jaw and ram's horn nuts to fix the tension. 100 - 200
569. A DOUBLE END TONGUE AND GROOVE PLANE by STANLEY. Fully 99% of original nickel plating remains on this pristine example. It is in brand new condition in the original box, noting that part of the label is label is torn away. 120 - 240
570. An unused DOUBLE BLADE SHIPWRIGHT'S BEVEL, No. 85, by H. Chapin, U.S. Standard. This scarce ca. 1850's type bevel is in brand new condition. 75 - 150
571. A rare LUMBER GAUGE SLIDE CALIPER by the Lufkin Rule Company, Saginaw, Michigan. This is only the second example of this rare Lufkin lumber tool that we have been privileged to offer for sale. This variation is graduated with the obscure "Decimal C" log scale. It was found in Northern Maine, where calipers for gauging lumber were once in high demand. It is in excellent condition and clearly marked on the brass plate that secures the moving caliper arm with the maker name and location. 500 - 1000
572. A BOXED SET OF TEN CLEAN CAULKING IRONS, all by the Buffum Tool Company, Louisiana, Missouri. All are in new condition in their original slide-top wooden box. Also included is a caulking mallet. The mallet has seen some use, but the irons have spent their entire life in this box. 175 - 350
573. An "ODD JOBS" COMBINATION TOOL, No. 1, by STANLEY. This multi-purpose device that was produced under a patent issued on January 25, 1887, retains its original rule and is in top collector quality condition. A nice example. 200 - 400
574. An extra early and very well preserved TWO-FOLD FOLDING RULE by A. Gifford, Westport, Massachusetts. Anthony Gifford's diverse career included seventeen years at sea, including two as Captain of a whaling ship. He eventually established a rule making factory in Westport in 1850, where this rule would have been produced. This extra thick rule is embellished with architect's scales, M and E scales and fitted with a Gunter slide. One of the best examples of this rule that we have seen. 300 - 600
575. An exceptionally clean, complete and extensive GENTLEMAN'S TOOL KIT by Sheffield makers William Marples & Sons. Without question, the finest example of this genre that we have been privileged to offer for sale, this complete and original set includes a Rabone ivory rule and a wide range of tools by Marples. Included in the set are a rosewood handle folding saw, hammer, chisels and gouges, nippers, pliers, a hand vise and gimlets. These kits were designed to appeal to the well-heeled, more as showpieces than for doing any practical work. Generally, they are found missing pieces or with the tools having been employed to their detriment in an "unworkmanlike" manner. This set is absolutely perfect. Extra special. 1000 - 2000
576. THREE FANCY DUTCH MOLDING PLANES including a triple iron complex molder; a double iron complex molder; and a brass-appointed filletster plane. All are in excellent collector quality condition. 150 - 300
577. A "VICTOR" SMOOTHING PLANE, No. 4, by Leonard Bailey and Company, Hartford, Connecticut, patented December 12, 1876. Fully 85% of the original black japan finish remains on this screw lock cap example. 300 - 600
578. TWO SPECIAL PURPOSE WOODWORKING PLANES including a double iron string router and a pattern maker's oak fillet plane. From the Carl Bostrom Collection. 80 - 160
579. A rare DOUBLE MARKED "SPILL" PLANE by Edward Preston and Sons, Birmingham, England. This pristine plane also bears the imprint of ironmongers T.S. Kaye & Sons, Hull, England. It is in top collector quality condition. 125 - 250
580. THREE EARLY BOSTON MAKER LEVELS including a Lambert 18" example in Cuban mahogany; an A.E. Young Cuban Mahogany level in the 30" length; and an example by obscure maker Jas. McCoskrie also of Cuban Mahogany in the 30" length. All are in clean and sound condition. 150 - 300
581. A rare and very well preserved example of HOLLY'S PATENT SMOOTHING PLANE as produced by Silsby, Race and Holly, Seneca Falls, New York. This distinctive pattern patented plane was produced under a patent granted to Birdsill Holly on July 6, 1852. A nice example of an important pre-Civil War patented plane in excellent collector quality condition. 1000 - 2000
582. A QUIRK OVOLO WITH BEVEL MOLDING PLANE by Z.J. McMaster, Sing Sing, New York. Beginning in the 1820's and continuing for nearly fifty years, New York State contracted with individuals to supervise the making of wooden planes in New York prisons. This was primarily done in Auburn Prison in Upstate New & York, but in the early years, some planes were produced in Sing Sing Prison on the Hudson River. This example by prison contractor's Zelman J. McMaster is in super condition and boldly struck with the Sing Sing imprint, which rates two stars for rarity in American Wooden Planes--a rating which bears no relationship to the scarcity of these planes. One of the best examples of the Sing Sing mark we have seen. 100 - 200
583. A SIX-TINE FORGED EEL SPEAR by C. Drew and Company having a bold Drew imprint. This graphic spear is in clean and sound condition. 125 - 250
584. An early PHILADELPHIA MAKER FOLDING RULE by I. (John) Mansell, (Philadelphia, Pennsylvania). Very likely the earliest Philadelphia rulemaker, Mansell is recorded as having produced rules in that city in 1813. This extra thick rule has steel tips and is embellished with unusual graduations that we have not previously encountered. From the William Eviston Collection. 600 - 1200
585. An elaborate Nineteenth Century MACHINISTS TOOL CHEST fashioned from cherry and mahogany and ornamented with fancy brass drawer pulls. This most unusual form of chest has a deep compartment adjacent to the drawers, which was likely designed for holding surface gauges and other oversize tools. A great chest in excellent collector quality condition. 750 - 1500
586. THREE "UR" MAKER MOLDING PLANES including an H. Lebhart cock bead; a J. Mosser round; and an N.C. Weeks rabbet. All have been boldly struck with the marks of their obscure makers. From the David Brandt Collection. 125 - 250
587. TWO OUT-OF-PRINT REFERENCE BOOKS including John Moody's "The American Cabinet Maker's Plow Plane" and Roger K. Smith's "Patented and Transitional Planes in America, Volume I". Both are in top collector quality condition. 100 - 200
588. An early YELLOW BIRCH CROWN MOLDING PLANE by Isaac Field, Providence, Rhode Island). This most interesting molder has a profile consisting of a bead, ogee and "V" groove. The mark is overstruck with the initials "W.D." The replacement handled has a tight crack, but the plane is otherwise excellent. 350 - 750
589. An early HANDLED COMPLEX MOLDING PLANE by I. Schauer having wide flat chamfers. Schauer is documented to have worked from ca. 1820 to 1834 only. The tip of the tote finial has been sheared, but the plane is otherwise in clean and sound condition. 150 - 300
590. A classic HAND FORGED DENGLESTOCK AND HAMMER. These tools were used for keeping the blade of a mowing scythe straight. The denglestock was driven into a stump and the blade was hammered out periodically to remove the dents from the odd rock or two that is found in a New England field. Both have a most appealing smooth, dark patina and are in clean and sound condition. The denglestock has an interesting "cloverleaf" forging set in the body. 100 - 200
591. A SHOULDER CLEANOUT MOLDING PLANE by John Veit, New Market and Green Street, Philadelphia, Pennsylvania. This most interesting plane has an extended sole set an 90 degrees to the body. Its specific original intended function is not known. 200 - 400
592. A SMALL SIZE CORNICE MOLDING PLANE having an applied side fence and double astragal profile The initials "L.S." are marked on the toe of this early crown molding plane. 200 - 400
593. An UNIQUE PROTOTYPE SMOOTHING PLANE by Stewart Spiers, Ayr, Scotland. This extremely rare Spiers variation is fitted with a bronze cam lock lever to secure the cutting iron. This plane was likely produced at the end of the planemaking career of Stewart Spiers as he struggled to compete with a world that had changed through industrialization and mass production during his lifetime. Fully 95% of the original paint remains on this example, which has had a tight handle crack reglued at some point in its long life. 1500 - 3000
594. THREE NEW ENGLAND MAKER MOLDING PLANES including a W. Raymond sash cope; an H. Wetherell fenced quirk round; and an I. Sleeper quarter round. All are in clean and sound condition. 125 - 250
595. A showy ADJUSTABLE CHAMFER PLANE having a figured pearwood body and a pair of brass set screw. An interesting and fully functional plane in top collector quality condition. 150 - 300
596. THREE CONNECTICUT MAKER COMPLEX MOLDING PLANES including a Phoenix Factory quirk ogee; a D. Copeland bilection molder; and a reverse ogee by Birminham maker L. Deforest. 175 - 350
597. A TWO-FOOT, FOUR-FOLD FOLDING RULE, No. 82, by STANLEY. This arch joint rule was Stanley's top of the line folding board measure rule. This fully bound rule shows nearly no evidence of use and is in top collector quality condition. From the James Doerflinger Collection. 150 - 300
598. A rare and nearly perfect TWO-FOOT, FOUR-FOLD FOLDING RULE, No. 4, by STANLEY. This was the only rule designated as "extra-thin" offered by Stanley. The brass hinges are applied to the outside of the body of the rule, rather than recessed into it, as is the standard practice. A nice an example of this elusive rule that we have offered for sale. Choice. From the James Doerflinger Collection. 300 - 600
599. A MASSIVE HANDLED CORNICE PLANE having a large quarter round profile. Also included in this lot is a pull type jack plane. 100 - 200
600. An early MAHOGANY LEVEL by J.W. Andrews, Albany, New York. This "Hudson River" type letter is marked with Andrews' bold "eagle" imprint. 150 - 300
601. A rare MAHOGANY COMBINATION INCLINOMETER LEVEL, No. 13, by the Davis Level and Tool Company of Springfield, Massachusetts. One of the plumb vials contains an inclinometer level as patented by L.L. Davis in 1867. A rare inclinometer level in clean, sound condition. 250 - 500
602. A June 15, 1860 CARPENTER TOOL CHEST by J.R. Harper, Oneonta, New York. Included in the chest are the unlikely combination of engravings of Union General Ulysses S. Grant and a range of nude etchings. There are some original tools in the chest as well as paperwork from the 1860's. Harper would have been of the age for military service during the Civil War, but we can find no reference to his having served. This highly detailed chest is a superb snapshot of an important time in American history. From the Robert Matz Collection. 200 - 400
603. A SOLID BRASS SMOOTHING PLANE having a shapely mahogany handle and a "Bailey" type adjustment mechanism. 175 - 350
604. A HANDLED ROSEWOOD PLOW PLANE having boxwood arms and nuts by Edward Carter, Troy, New York. There is a sliver missing from the tote and some minore thread chips, but the plane is otherwise excellent and clearly marked with the maker name. A full set of cutting irons is included. From the Eric Olson Collection. 300 - 600
605. A LEVER ADJUST BLOCK PLANE by the Metallic Plane Company, Auburn, New York. The top of the "Excelsior" cutting iron retains its original wood "pusher". A rare plane in excellent collector quality condition. 300 - 600
606. THREE AMERICAN MADE COACH MAKERS MOLDING PLANES including a W.H. Pond compass round; an M. Crannel "T" rabbet; and a H.L. James small block plane. All are in excellent collector quality condition. 100 - 200
607. A TWO-FOOT, TWO-FOLD FOLDING RULE, No. 5, by STANLEY. This well preserved rule is marked with architect's scales and is in excellent collector quality condition. From the James Doerflinger Collection. 100 - 200
608. A COMBINATION PLANE, No. 45, by STANLEY. Thisca. 1940's type is in new condition in its original box. Absolutely perfect. 250 - 500
609. A rare CORRUGATED SOLE "JUNIOR JACK" PLANE, No. 5 1/4 C, by STANLEY. This rosewood handle plane is marked with the ca. 1930's era "Notched Rectangle" trademark. A nice example of an uncommon Stanley bench plane. 125 - 250
610. THREE CLEAN AND EARLY MAHOGANY LEVELS, all by Mulliken and Stackpole, Boston, Massachusetts. Included are assorted configurations and sizes. One has protective brass corners on the ends. 120 - 240
611. THREE EXOTIC WOOD CONNECTICUT MAKER LEVELS including a Chapin No. 297 in Cuban mahogany; a early Stanley No. 11 in rosewood; and a Chapin-Stephens boxwood inclinometer type. 120 - 240
612. A showy UPTURNED SKATE PLOW PLANE having applewood arms and nuts by F. Dallicker, Douglas, Pennsylvania. This graphic plane is the first such variation that we have seen by Dallicker. 250 - 500
613. A classic MANTEL CLOCK INCLINOMETER LEVEL by the Davis Level and Tool Company, Springfield, Massachusetts, patented September 17, 1867. Fully 80% of the original black japan finish remains on this clean and complete example. 175 - 350
614. THREE RARE WEATHER RELATED BOOKS, all by Eric Sloane. Included are "The Weather Book", "Almanac and Forecaster", and "Look at the Sky". Eric Sloane is known to antique tool collectors as an artist who published many books on tools and early Americana. Sloane's weather books were some of his earliest efforts and were produced before his achievement of great popularity. They are consequently quite scarce and much sought after. These are all in excellent condition and retain their original dust jackets. 100 - 200
615. An early VIOLIN SHAPED GATE LOCK complete with original key. This very nicely patinated curiosity is in excellent working condition. Having seen tool collectors in all manner of crazy tool-themed garb and ourselves having a combination finial and weather vane in the shape of a wooden plane on our flagpole, we will not speculate on the possible motivations of the creator of a lock in the form of a musical instrument. 200 - 400
616. An early MAHOGANY SPECIAL PURPOSE LEVEL by J.W. Andrews, Albany, New York. The distinctive indentations on the ends of the level appear to be original to the tool and may have been used to facilitate the use of this extra long level as a mason's level in conjunction with a plumb bob. The first level of this configuration that we have encountered. Rare and extra early. 300 - 600
617. A classic SHIPWRIGHT'S RAZEE JOINTER PLANE having a beech handle and mahogany wedge. This magnificently grained Brazilian Rosewood plane is in nearly new condition. Simply a great plane. 200 - 400
618. THREE CAST BRONZE COACH MAKERS ROUTERS including cove, "V" shape and rounding types. All are highly detailed and very nicely patinated. 175 - 350
619. An American Black Walnut PATTERN MAKER'S SOLE PLANE including nine soles and irons. This classic pattern maker's plane is in nearly new condition. 200 - 400
620. THREE ENGLISH COMPLEX MOLDING PLANES including two by Brain of Shepley and another by Edward Preston. All have extra complex cuts. 125 - 250
621. TWO EIGHTEENTH CENTURY HANDLED MOLDING PLANES including a figured yellow birch ogee and a gutter plane fashioned from applewood. Both have early style pegged totes. 175 - 350
622. TWO CHAIR MAKERS' HAND TOOLS including a travisher spoke shave and wood body scorp of sculptural form. Both have a most appealing smooth and shiny patina. 125 - 250
623. An early FIXED SASH MOLDING PLANE by J. Martin. This is possibly James Martin of Baltimore, Maryland, who ca. 1799-1816. Also included are several sash templates. 100 - 200
624. A DOVETAIL SOLE BRASS SMOOTHING PLANE having ebony infill and a Buck Brothers parallel cutting iron. 500 - 1000
625. A MASSIVE LOG CALIPER by L.B. Sargent, Lincoln, New Hampshire. This classic New Hampshire lumberman's tool is also marked with the designation "Distributed by William Pitt, Concord". This pristine example is in unused condition. Extra nice. 500 - 1000
626. A CAST BRONZE SPOKE SHAVE that retains its original ebony wedge. It is marked with the owner imprint "Wm. Thomson" and very nicely patinated. 150 - 300
627. THREE CLEAN AND USABLE WOODWORKING PLANES, all by STANLEY. Included are a No. 20 circular plane; a No. 40 "Scrub"; and a No. 71 1/2 router having two original cutting irons. 90 - 180
628. THREE EARLY WOODWORKING PLANES including a chip carved horned smoother; a small Dutch gutter type; and a router having a ram's horn nut for fixing the cutting iron. 100 - 200
629. A CHAPLIN'S PATENT STYLE SHOOT BOARD PLANE complete with its original board. There seems to be no end to the variety of planes produced based on the Chaplin style. This one is in excellent condition and could be put to use if the purchaser so desired. 250 - 500
630. A YELLOW BIRCH BEAD MOLDING PLANE by S.W. Taber. This early plane has a relieved wedge and has been boldly struck with the imprint of this uncommon maker. There is a a chip from the side of the plane, but it is otherwise perfect. From the William Eviston Collection. 400 - 800
631. FIVE BORING MACHINE AUGER BITS including 1" to 2" sizes. All are in excellent condition and could be put directly to work. 100 - 200
632. A STEEL ROD ADJUSTMENT BORING MACHINE by the Millers Falls Company, Millers Falls, Massachusetts. This well preserved example includes a 2" auger bit. It is in clean and usable condition noting a tight crack in the wooden base. 250 - 500
633. An early EIGHTEENTH CENTURY ROUND MOLDING PLANE by Robert Wooding having an extra bold imprint. Wooding worked from ca. 1706 to 1726 and is recognized as one of the very first British planemakers to mark his tools with his name. 125 - 250
634. A rare SELF-ADJUSTING SASH MOLDING PLANE by E.W. Pennell, 90 Callowhill, Philadelphia, Pennsylvania having dual lignum boxing. One of the wedges is a later replacement, but the plane is otherwise excellent. 125 - 250
635. A rare BLAISDELL'S PATENT MARKING GAUGE by A.H. Blaisdell, Newton Corners, Massachusetts, Patented June 23, 1868. Certainly one of the most complex of all marking gauges, the Blaisdell's patent has all the qualities of a great collectible tool: exotic materials finely crafted and finished; bold maker and patent imprints; and a level of mechanical intricacy far beyond what is necessary for the task. They don't get much better. A nice example in excellent collector quality condition. 200 - 400
636. An UNHANDLED BOXWOOD PLOW PLANE, No. 245, by H. Chapin, Union Factory having boxwood arms and nuts. This very nicely patinated plane has an age check in one side and some minor thread chips but is otherwise in excellent condition. 250 - 500
637. A STEPPED PAIR OF COMPLEX MOLDING PLANES by G. White, Philadelphia, Pennsylvania. Each of these quirk ovolo with bead molders is very nicely boxed with Lignum vitae. 250 - 500
638. TWO ORIGINAL LABEL MOLDING PLANES, both by W.H. Pond, New Haven, Connecticut. Both are from the from the store of New Haven hardware dealer J.E. Bassett. Included are a double tongue and groove and an astragal. 125 - 250
639. Featured prominently on page 49 of Sandor Nagyszalancy's "The Art of Fine Tools" is a solid IVORY plow plane reportedly produced by London makers John Moseley and Son for the Crystal Palace Exhibition of 1851 in London. The unique scrimshaw decorated plane is embellished with stylized decorations of flags and heraldry on one side and the inscription "Palais D'Industrie/Paris" on the reverse side--an indication that the plane may actually have been produced for the exhibition at the French World's Fair of 1855 for which the Palais D'Industrie was the principal showplace for manufacturers. Whatever the case, the acquisition in the late 1990's of a pair of massive elephant tusks led craftsman Paul Hamler to inquire as to the interest in a REPLICA OF THE MOSELEY EXHIBITION PLANE, a total of five of which could be produced from the ivory tusks. The five were immediately subscribed at a cost of $12,000 each and were finished and distributed in 1999. This plane is one of those five and the first ever to be offered for public sale. The plane is identical in all respects to the original except that the Moseley name on the toe has been replaced with the designation "Hamler Tools/USA 1999". Complete with its original light green velvet base clear display case, this example is in absolutely perfect condition and ready to proudly display. A magnificent plane that was the masterpiece of the Paul Hamler tool making career that has now, sadly, ended. Highly recommended. 20000 - 40000
640. TWO EARLY WOODEN BRACES including an oak spring lock chuch type and another fashioned from Yellow birch that retains on original pad. 125 - 250
641. An example of the rare JACKSON GORHAM PATENT HAND SAW, No. 38, as produced by Moore, Henszey and Company, Philadelphia, Pennsylvania, patented May 13, 1856. Gorham was from Bairdstown, Georgia and had a wide range of patents. This saw was eventually produced by Henry Disston & Sons as their No. 42 combination saw, square and scribe. 600 - 1200
642. A CUBAN MAHOGANY AND BRASS SPIRIT LEVEL by C. Frech. This fancy level has been embellished with an elaborate eagle imprint by this obscure maker who reportedly worked on Staten Island, New York. A nice example. 100 - 200
643. A SALESMAN'S DISPLAY SPIRIT LEVEL by the B.L. & T. Manufacturing Company, Walden, New York, patented November 14, 1905. This diminutive level showcases the points of the A.H. Brundage patent. We suspect that the B.L. & T. stands for "Brundage Level & Tool". An uncommon early Twentieth Century salesman's display level. 200 - 400
644. THREE TOOL RELATED REFERENCE BOOKS including the first volume of Roger K. Smith's "Patented and Transitional Planes in America, Volume 1"; Paul Kebabian' "American Woodworking Tools"; and Alvin Sellens' "The Stanley Plane". All are in top collector quality condition. 100 - 200
645. An UNHANDLED BOXWOOD PLOW PLANE having boxwood arms and nuts., No. 510, by the Greenfield Tool Company, Greenfield, Massachusetts This extra crisp and clean example is marked with the owner imprint "D.M. Wills". A pretty plow. 175 - 350
646. A BENNET AND BLOEDEL PATENT BIT BRACE as produced by the L.M. and K. Works, Lancaster, New York in accordance with the specifications of the Bennet and Bloedel Patent of October 10, 1905. Fully 95% of the original nickel plating remains on this pristine example of this obscure combination drill and brace. 500 - 1000
647. TWO EARLY BIT BRACES, including one fashioned from Yellow Birch and including one original pod. Also included is an Eighteenth Century type iron brace that is missing its fixing screw. Both have a most appealing uniform golden patina. 175 - 350
648. A SELECTION OF EXTRA CLEAN CANADIAN MOLDING PLANES including bead, sash, round type, etc. Makes include Dalpe, Dawson, Wallace, etc. From the George Gouldburn Collection. 100 - 200
649. A MODEL OF A STRATTON BROTHERS BRASS BOUND LEVEL by Paul Hamler. This elaborately detailed level has a working level vial and is marked with the Stratton Brothers name on the top plate. It is in brand new condition. The departure of world class miniaturist Paul Hamler from the world of antique tools, where his creations have been eagerly anticipated for many years, to the making of small-the scale replicas of Kentucky rifles will leave a tremendous void. We expect that what few examples of Hamler's work that makes it to the marketplace will increase substantially in value. 200 - 400
650. An extremely rare TRIANGULAR INCLINOMETER LEVEL. Enough of these levels have surfaced to demonstrate that they were manufactured, but little is known of their origins. This rare variation has an adjustable "Hudson River" type vial set into the rosewood face. A graduated boxwood strip is set in the bottom of the triangle on this graphic and very well preserved level. 1000 - 2000
651. A MINIATURE BOXWOOD BULLNOSE PLANE by Bill Carter, London, England. The name of the maker and working location are marked on the heel of this precisely hand crafted miniature. 100 - 200
652. A masterfully executed EBONY AND BRASS REPRODUCTION OF THE "ULTIMATUM" BRACE by master miniaturist Paul Hamler. 125 - 250
653. FIVE EXTRA CLEAN MARKING GAUGES, all by STANLEY. Included are examples of the No. 61; No. 62; No. 65; a No. 73 and No. 77 mortise gauge. All are in top collector quality condition. 120 - 240
654. TWO CLEAN AND COMPLETE DADO PLANES, both by STANLEY. Included are examples in the 1/4" and 1/2" sizes. Both retain some 95% of their original black japan finish and are in top collector quality condition. 120 - 240
655. TWO MINIATURE ENGLISH TOOLS, both by master miniaturist Paul Hamler. Included in this offering are an IVORY handled hammer and an ebony handle bow saw. Both are in brand new condition. 100 - 200
656. A ONE-FOOT, SIX-INCH FOLDING RULE, No. 38, by STANLEY. This IVORY and German silver caliper rule is in crisp and clean condition. 125 - 250
657. A SALESMAN'S DISPLAY "KEEN KUTTER" AXE by the E.C. Simmons Hardware Company, St. Louis, Missouri. It is nickel plated brass and has an embossed logo. 250 - 500
658. A rare "TYPE 1" MACHINISTS BENCH LEVEL in the desirable 6" length by L. S. Starrett, Athol, Massachusetts. This first venture into the production of levels by this pioneering manufacturer of machinists tools is easily recognizable by its distinctive casting. The only example of this early level that we have ever offered for sale. Some 70% of the original black japan finish remains on this crisp and clean example. 500 - 1000
659. An example of MANN'S "TIGER" AXE as produced by the Mann Edge Tool Company, Lewistown, Pennsylvania. Nearly all of the highly graphic original paper label remains on this pristine example. Colorful and showy. 100 - 200
660. An absolutely perfect MINIATURE ADVERTISING AXE by Fayette R. Plumb, Philadelphia, Pennsylvania. All of the original finish, decal and decorative paint remain on this pocket-size axe, which was likely intended for use as a counter display. 300 - 600
661. An early HAND CRANK PRINTING PRESS as patented by Thomas Finch of Madisonville, Ohio on October 11, 1904. This early mechanical device is complete and in excellent condition. 100 - 200
662. A MASSIVE CAST IRON COACH MAKERS RABBETING SPOKE SHAVE. This classic shave has dual wooden handles and an affixed sole than throat of steel. A classic coach maker's tool in excellent collector quality condition. 100 - 200
663. A MASSIVE PANEL RAISING PLANE by R. and W.C. Biddle and Company, Philadelphia. This extra clean plane retains its original side and sole stops. The cutting iron measures 3 3/4" in width. This massive Philadelphia plane is in top collector quality condition. 200 - 400
664. A rare GRADUATED ARMS PLOW PLANE by J. Killam, Glastenbury, Connecticut. This plane has fractional inch graduations inscribed on the underside of the arms in a professional manner that must have been added when the tool was made. This is the first example of this variation that we have seen on an American made tool. Very rare. 1000 - 2000
665. A rare Eighteenth century COACH QUARTER ROUND MOLDING PLANE by Jo. Fuller, Providence, Rhode Island. This Yellow Birch body plane has a most appealing uniformly dark patina and is in excellent collector quality condition, noting some minor stains. 150 - 300
666. An artfully crafted ROSEWOOD, MAHOGANY AND BRASS SHOOT BOARD PLANE. This high quality special purpose plane is in top condition and shows evidence of having been produced by a master craftsman. A classic woodworking collectible that is also a great working tool. Highly recommended. From the Donald Nesslage Collection. 750 - 1500
667. An example of the O. HANKS PATENT LEVEL as produced by Watkins and Son, Bristol, Connecticut. This level is marked with the designation "Patent 1847", but we have been unable to find the Patent. These tools were used to assist in laying out machinery in large shops or mills. 150 - 300
668. A DOUBLE ROSEWOOD BOXED COMPLEX MOLDING PLANE by Israel White, Philadelphia, Pennsylvania. This quirk ovolo with bead molder is in extra crisp and clean condition and boldly struck with White's distinctive imprint. The larger of the boxwood strips has a distinctive dovetail cut to hold it in place. 100 - 200
669. A "VICTOR" BLOCK PLANE, No. 1, by Leonard Bailey & Company, Hartford, Connecticut. This screw lock cap iron example was patented on December 12, 1876. It is in clean, sound and complete condition. 250 - 500
670. A MODEL OF A SCOTTISH PATTERN SPIRIT LEVEL by Paul Hamler. This elaborately detailed level has a working level vial and fancy inlaid brass in the side faces and top. It is in brand new condition. The departure of world class miniaturist Paul Hamler from the world of antique tools, where his creations have been eagerly anticipated for many years, to the making of small-the scale replicas of Kentucky rifles will leave a tremendous void. We expect that what few examples of Hamler's work that makes it to the marketplace will increase substantially in value. 125 - 250
671. TWO ENGLISH WOODWORKING TOOLS including an ebony slitting marking gauge and a boxwood stair rail shave by Fairclough, which has been refinished by a previous owner. 80 - 160
672. An early HAND FORGED TWO-STEP BUGGY STEP having distinctive lyre pattern finials. This well made carriage accessory looks to date from the first quarter of the Nineteenth Century. 100 - 200
673. A PATENT COMBINATION BREAST DRILL as patented and produced by Stephen McLellan, New York, New York. This high gizmocity tool incorporates ratchts, a chain drill mechanism and the ability to pivot as necessary. The U.S. Patent document includes eight pages of claims and illustrations. McLellan had previously patented several braces while a resident of San Antonio, Texas. This monstrosity may have been created while McLellan was in New York being treated at Bellevue Hospital for the sort of ailment that often afflicts the overly creative. Crazy enough to be collectible. 100 - 200
674. A ONE-FOOT, FOUR-FOLD FOLDING RULE of IVORY and German silver, No. 99 1/2, by Stephens & Company, Riverton, Connecticut. This fully bound caliper rule has aged to a uniform dark yellow color, but is otherwise in excellent collector quality condition. From the John Meneely Collection. 100 - 200
675. A "TYPE" 8 MILLER PATENT COMBINATION PLANE, No. 41, by STANLEY. Fully 85% of the original paint remains on this clean example, which shows some evidence of having had some "enhancement" to the finish at some point. It includes the original filletster bed, slitter and stops as well as the filletster cutting iron. A nice example of a desirable Stanley plane. 800 - 1600
676. TWO EXTRA COMPLEX MOLDING PLANES including a quirk ovolo, cove and astragal molder by Baldwin and an unmarked quirk ogee with astragal. Both are in top collector quality condition. 150 - 300
677. An example of BOSWORTH'S PATENT DENTAL PLUGGER as patented and produced by Martin L. Bosworth, Warren, Rhode Island in accordance with the specifications of the Bosworth Patent of June 21, 1892. This example is in top condition in its original velvet-lined case. 100 - 200
678. A No. 036 PATENT INCLINOMETER FOLDING RULE, by the Chapin-Stephens Company, Pine Meadow, Connecticut. This rule which incorporates a level, bevel, rule and inclinometer function into a single device, was originally patented and produced by L.C. Stephens and Company in 1858. It was eventually produced and marketed by STANLEY after they acquired the Chapin-Stephens Company. Fully 95% of the original finishes remain on this exceptionally crisp example. 125 - 250
679. THREE PRECISION MEASURING ITEMS including a compass in its original mahogany case; a surveyor's prism in its original box; and a compass used to gauge deviation from True North. All are in top collector quality condition. 100 - 200
680. An early CASED RECORDING BAROMETER marked with the designation "R.F., Paris, France". This high quality instrument has a finger joint construction mahogany case and retains its original winding key. A great precision instrument from the earliest days of the Nineteenth Century fascination with science. 250 - 500
681. An exceptionally well preserved and complete example of the PATENTED APPLE PARER of E.L. Pratt, patented October 6, 1863. The main gear is cast with the patent date on this mechanical marvel, which has a bracket and fixing screw to allow it to be attached to the kitchen table. 125 - 250
682. A SET OF THREE CENTER HOLLOWING MOLDING PLANES, all by A. Smith, Lowell, Massachusetts. All are equipped with a single fence which is apparently designed to be used interchangeably with either of the three body sections. It is marked with the owner imprint L. Whiting and in nearly new condition. A graphic tool in top collector quality condition. From the David Brandt Collection. 250 - 500
683. A COLLECTION OF THREE PLANEMAKERS FLOATS including an unusual side cut type. All appear early and could be put directly to use, if the purchaser so desired. 125 - 250
684. A SOLID ROSEWOOD BRASS BOUND LEVEL by the Goodell Pratt Company, Greenfield, Massachusetts. This double plumb vial level is fashioned from prominently grained Brazilian Rosewood and is in excellent collector quality condition. 100 - 200
685. TWO INTERRUPTED BOXING BEAD MOLDING PLANES, both by T. Goldsmith, Philadelphia, Pennsylvania. Included are 5/8" and 3/4" sizes. Both are slip sided and have a most appealing smooth, dark patina. From the William Eviston Collection. 125 - 250
686. A rare BOSTON MAKER FOLDING RULE by J. Watts, Boston, Massachusetts. This two-foot, two-fold rule is embellished with decoration marks. There are some minor stains, but this early and uncommon folding rule is otherwise excellent. 125 - 250
687. An IVORY INFILL MINIATURE SIZE "ULTIMATUM" BRACE masterfully hand crafted by noted tool miniaturist Paul Hamler. This small wonder has been artfully engraved on the German silver fittings. A showpiece. 400 - 800
688. A rare DOUBLE IRON SMOOTHING PLANE by Kieffer and Auxer, Lancaster, Pennsylvania, patented March 27, 1849. This uncommon early patented plane has been boldly struck with the imprint of this important Southeastern Pennsylvania planemaking partnership. 100 - 200
689. An early CAM-TYPE SAW SET by Charles Morrill, Jersey City, New Jersey, patented December 14, 1886. This uncommon saw set has been given the "R" rating for "Rare" in the Friberg book on "Patented American Saw Sets". 80 - 160